Tag Archives: reducer motor

China best 380V Cast Alu Helical Gear Reducer Three Phase AC Motor Gearbox Nmrv75 sequential gearbox

Product Description

Product Description

Model No.: NMRV/NRV571, 030, 040, 050, 063, 075, 090, 110, 130
Reduction gear, worm gear, gear reducer
Reduction gear

Features:
1) High quality aluminum alloy die cast gearbox
2) High accuracy worm gear and worm shaft
3) Less noise and lower temperature increase
4) Easy mounting and linking, high efficiency
5) Power: 0.06 – 15kW
6) Output torque: 2.7 – 1, 760Nm
7) Transmission rate: 5 – 100
Inner packing: Carton Outer packing: Wooden case
Reduction gear, worm gear, gear reducer

  model   PAM IEC   N   M P   7.5D   10D   15D   20D   25D   30D   40D   50D 60D    80D
  NMRV030   63B5   95   115   140   11   11   11   11   11   11   11   /   /   /
  NMRV030   63B14   60   75   90   11   11   11   11   11   11   11   /   /   /
  NMRV030   56B5   80   100   120   9   9   9   9   9   9   9   9   9   9
  NMRV030   56B14   50   65   80   9   9   9   9   9   9   9   9   9   9
  NMRV040   71B5   110   130   160   14   14   14   14   14   14   14   /   /   /
  NMRV040 71B14    70   85   105   14   14   14   14   14   14   14   /   /   /
  NMRV040   63B5   95   115   140   11   11   11   11   11   11   11   11 11    11
  NMRV040   63B14   60   75   90   11   11   11   11   11   11   11 11    11   11
  NRMV050   90B5   130   165   200   19   19   19   19   19   /   /   /   /   /
  NRMV050   80B14   80   100   120   19   19   19   19   19   /   /   /   /   /
  NRMV050   71B5   110   130   160   14   14   14   14 14    14     14   14   14   14
  NRMV050   71B14   70   85   105   14   14   14   14   14   14   14   14   14   14
  NMRV063   90B5   130   165   200   24   24   24   24   24   24   /   /   /   /
    NMRV063   90B14   95   115   140   24   24   24   24   24   24   /   /   /   /
    NMRV063   80B5   130   165   200   19   19   19   19   19   19   19   19   /   /
    NMRV063   80B14   80   100   120   19   19   19   19   19   19   19   19   /   /
  NRMV075   100/112B5   180   215   250   28   28   28   /   /   /   /   /   /   /
  NRMV075   100/112B14   110   130   160   28   28   28   /   /   /   /   /   /   /
  NRMV075   90B5   130   165   200   24   24   24   24   24   24   24   /   /   /
  NRMV075   90B14   95   115   140   24   24   24   24   24   24   24   /   /   /
  NMRV090   100/112B5   180   215   250   /   /   /   /   24   24   24   24   24   24
    NMRV090   100/112B14   110   130   160   /   /   /   /   24   24   24   24   24   24
    NMRV090   90B5   130   165   200   /   /   /   /   /   /   /   19   19   19
    NMRV090   90B14   95   115   140   /   /   /   /   /   /   /   19   19   19

Ms series aluminum housing three-phase asynchronous motors, with latest design in entirety, are made of selected quality materials and conform to the IEC standard.

MS series motor have good performance, safety and reliable operation, nice appearance, and can be maintained very conveniently, while with low noises, little vibration and at the same time light weight and simple construction. These series motors can be used for general drive.
OPERATING CONDITIONS
Ambient temperature: -15° C<0<40° C
Altitude: Not exceed 1000m.
Rated voltage: 380V, 220V~760V is available.
Rated frequency: 50Hz/60Hz
Duty/Rating: S1(Continuous)
Insulation class: F
Protection class: IP54
Cooling method: IC0141

Model Rated power Current Power factor Efficiency speed Locked Rotor
 torque		 Locked Rot or Current Breakdown Torque
Type (KW) (A) (cosΦ) (η%) (r/min) Tst
TN		 Ist
TN		 Tmax
TN
synchronous speed 3000r/min(380V 50HZ)
MS561-2 0.09 0.29 0.77 62 2750 2.2 5.2 2.1
MS562-2 0.12 0.37 0.78 64 2750 2.2 5.2 2.1
MS631-2 0.18 0.53 0.8 65 2780 2.3 5.5 2.3
MS632-2 0.25 0.69 0.81 68 2780 2.3 5.5 2.3
MS711-2 0.37 1.01 0.81 69 2800 2.2 6.1 2.3
MS712-2 0.55 1.38 0.82 74 2800 2.3 6.1 2.3
MS801-2 0.75 1.77 0.83 75 2825 2.3 6.1 2.2
MS802-2 1.1 2.46 0.84 76.2 2825 2.3 6.9 2.2
MS90S-2 1.5 3.46 0.84 78.5 2840 2.3 7.0  2.2
MS90L-2 2.2 4.85 0.85 81 2840 2.3 7.0  2.2
MS100L-2 3 6.34 0.87 82.6 2880 2.3 7.5 2.2
MS112M-2 4 8.20  0.88 84.2 2890 2.3 7.5 2.2
MS132S1-2 5.5 11.1 0.88 85.7 2900 2.3 7.5 2.2
MS132S2-2 7.5 14.9 0.88 87 2900 2.3 7.5 2.2
MS160M1-2 11 21.2 0.89 88.4 2947 2.3 7.5 2.2
MS160M2-2 15 28.6 0.89 89.4 2947 2.3 7.5 2.2
MS160L-2 18.5 34.7 0.90  90 2947 2.3 7.5 2.2
synchronous speed 1500 r/min(380V 50HZ)
MS561-4 0.06 0.23 0.70  56 1300 2.1 4.0  2.0 
MS562-4 0.09 0.33 0.72 58 1300 2.1 4.0  2.0 
MS631-4 0.12 0.44 0.72 57 1330 2.2 4.4 2.1
MS632-4 0.18 0.62 0.73 60 1330 2.2 4.4 2.1
MS711-4 0.25 0.79 0.74 65 1360 2.2 5.2 2.1
MS712-4 0.37 1.12 0.75 67 1360 2.2 5.2 2.1
MS801-4 0.55 1.52 0.75 71 1380 2.3 5.2 2.4
MS802-4 0.75 1.95 0.76 73 1380 2.3 6.0  2.3
MS90S-4 1.1 2.85 0.77 76.2 1390 2.3 6.0  2.3
MS90L-4 1.5 3.72 0.78 78.2 1390 2.3 6.0  2.3
MS100L1-4 2.2 5.09 0.81 81 1410 2.3 7.0  2.3
MS100L2-4 3 6.78 0.82 82.6 1410 2.3 7.0  2.3
MS112M-4 4 8.8 0.82 84.6 1435 2.3 7.0  2.3
MS132S1-4 5.5 11.7 0.83 85.7 1445 2.3 7.0  2.3
MS132S2-4 7.5 15.6 0.84 87 1445 2.3 7.0  2.3
MS160M-4 11 22.5 0.84 88.4 1460 2.2 7.0  2.3
MS160L-4 15 30.0  0.85 89.4 1460 2.2 7.5 2.3
                 
Model Rated power Current Power factor Efficiency speed Locked Rotor
 torque		 Locked Rot or Current Breakdown Torque
Type (KW) (A) (cosΦ) (η%) (r/min) Tst
TN		 Ist
TN		 Tmax
TN
synchronous speed 1000 r/min(380V 50HZ)
MS711-6 0.18 0.74 0.66 56 900 2.0  4.0  1.9
MS712-6 0.25 0.95 0.68 59 900 2.0  4.0  1.9
MS801-6 0.37 1.23 0.70  62 900 2.0  4.7 1.8
MS802-6 0.55 1.70  0.72 65 900 2.1 4.7 1.8
MS90S-6 0.75 2.29 0.72 69 900 2.1 5.3 2.0 
MS90L-6 1.1 3.18 0.73 72 910 2.1 5.5 2.0 
MS100L-6 1.5 4.0  0.76 76 910 2.1 5.5 2.0 
MS112M-6 2.2 5.6 0.76 79 940 2.1 6.5 2.0 
MS132S-6 3 7.40  0.76 81 940 2.1 6.5 2.1
MS132M1-6 4 9.5 0.76 82 960 2.1 6.5 2.1
MS132M2-6 5.5 12.6 0.77 84 960 2.1 6.5 2.1
MS160M-6 7.5 17.2 0.77 86 960 2.0  6.5 2.1
MS160L-6 11 24.5 0.78 87.5 960 2.0  6.5 2.1
synchronous speed 750 r/min(380V 50HZ)
MS801-8 0.18 0.83 0.61 51 630 1.9 3.3 1.8
MS802-8 0.25 1.10  0.61 54 640 1.9 3.3 1.8
MS90S-8 0.37 1.49 0.61 62 660 1.9 4.0  1.8
MS90L-8 0.55 2.17 0.61 63 660 2.0  4.0  1.8
MS100L1-8 0.75 2.43 0.67 70 690 2.0  4.0  1.8
MS100L2-8 1.1 3.36 0.69 72 690 2.0  5.0  1.8
MS112M-8 1.5 4.40  0.70  74 680 2.0  5.0  1.8
MS132S-8 2.2 6.00  0.71 79 710 2.0  6.5 1.8
MS132M-8 3 7.80  0.73 80 710 2.0  6.5 1.8
MS160M1-8 4 10.3 0.73 81 720 2.0  6.6  2.0 
MS160M2-8 5.5 13.6 0.74 83 720 2.0  6.6  2.0 
MS160L-8 7.5 17.8 0.75 85.5 720 2.0  6.6 2.0 

Detailed Photos

Our Advantages

We have more than 30years on all kinds of ac motors and gearmotor ,worm reducers producing ,nice price 
What we do:
1.Stamping of lamination
2.Rotor die-casting
3.Winding and inserting – both manual and semi-automatically
4.Vacuum varnishing
5.Machining shaft, housing, end shields, etc…
6.Rotor balancing
7.Painting – both wet paint and powder coating
8.assembly
9.Packing
10.Inspecting spare parts every processing
11.100% test after each process and final test before packing.,

FAQ

Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial, Household Appliances, Power Tools
Operating Speed: Constant Speed
Number of Stator: Three-Phase
Species: Y, Y2 Series Three-Phase
Rotor Structure: Squirrel-Cage
Casing Protection: Protection Type
Samples:
US$ 119/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

What is a Gearbox and How Does It Work?

A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.

Here’s how a gearbox works:

  1. Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
  2. Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
  3. Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
  4. Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.

Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.

China best 380V Cast Alu Helical Gear Reducer Three Phase AC Motor Gearbox Nmrv75 sequential gearbox China best 380V Cast Alu Helical Gear Reducer Three Phase AC Motor Gearbox Nmrv75 sequential gearbox
editor by CX 2024-05-14

China Standard Wholesale 7.1r130 Reducer Construction Machinery Spare Parts, Concrete Truck Mixer Motor Reducer Gearbox gearbox design

Product Description

The Mixer Truck Gear Box 7.1R130 is a robust and high-performance gearbox designed to meet the demands of mixer trucks in various construction and mixing applications. This gearbox offers superior torque and durability, making it an ideal choice for handling the heavy loads and constant operation required by mixer trucks.
The 7.1R130 gearbox features a precision-crafted internal mechanism that ensures smooth gear shifts and efficient power transmission. Its optimized gear ratios allow for maximum torque output, enabling the mixer truck to handle even the most viscous concrete mixtures with ease.
Durability is a key aspect of this gearbox, with heavy-duty materials and robust construction ensuring long-lasting performance. The gearbox is also designed to withstand the constant vibrations and impacts encountered during mixing and transportation, ensuring reliable operation even in challenging conditions.
Maintenance is simplified with the 7.1R130 gearbox, thanks to its user-friendly design and accessible components. Regular maintenance and lubrication can be performed with ease, extending the gearbox’s lifespan and reducing the risk of breakdowns.
In addition, the Mixer Truck Gear Box 7.1R130 offers excellent compatibility with a wide range of mixer trucks. Its compact size and flexible installation options make it easy to integrate into existing truck systems, minimizing downtime and maximizing uptime.
Overall, the Mixer Truck Gear Box 7.1R130 is a reliable and high-performance gearbox solution for mixer trucks. Its robust construction, optimized gear ratios, and user-friendly design make it an essential component for any construction or mixing operation that demands superior performance and durability.

Model NO. 7.1R130 Model 7.1R130
Lead Time 5 Days Transport Package Standard Export Wooden Case
Colour as Your Request Usage Concrete Mixer
Weight 330KG Specification 56*56*68
Trademark Bodeke Origin China
HS Code 8483457100 Production Capacity 100 Sets/Month

 

Technical data of Camray CMR conrete mixer gearbox
Model 7.1R130
Max.Output Torque
Nm		 71,000
Ratio
l=		 1:130
Max.installation angle of Drum 11°
Max.Input speed
rpm		 2500
Max.Output speed
rpm		 18
Max.Capacity of Drum   m³ 10~14
Weight(without oil)    KG 320
Lubrication Oil Quantity  dm³ 11.5
Max.Misalignmeng of flange
ZTS P68 reducer / gearbox ZHP P75S reducer / gearbox A4VG180HD1MT1/32R-NSF02F571-S PISTON pump 875719000
ZTS P70 reducer / gearbox DD33-MF reducer / gearbox A7VO55LRDS/63L-NZB01-S PISTON pump 8483457100
ZTS P75S reducer / gearbox ZHP P68 reducer / gearbox Concrete Mixer Truck  Mixer Drum  Cement Mixer SAUER,Bonfiglioli,TOPUNIOU,KYB,REXROTH, , ,PMP

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery
Function: Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step
Samples:
US$ 1350/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Different Types of Gearboxes and Their Applications

There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:

  • Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
  • Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
  • Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
  • Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
  • Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
  • Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
  • Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.

Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.

China Standard Wholesale 7.1r130 Reducer Construction Machinery Spare Parts, Concrete Truck Mixer Motor Reducer Gearbox gearbox design China Standard Wholesale 7.1r130 Reducer Construction Machinery Spare Parts, Concrete Truck Mixer Motor Reducer Gearbox gearbox design
editor by CX 2024-05-08

China Good quality Hot Sale High Quality Low Noise Black Speed Gearbox Gear Reducer Box Worm Drive Shaft Gearbox with AC Motor gearbox and motor

Product Description

Product Description

Model No.: NMRV/NRV571, 030, 040, 050, 063, 075, 090, 110, 130,150

Reduction gear, worm gear, gear reducer
Reduction gear
Features:
1) High quality aluminum alloy die cast gearbox
2) High accuracy worm gear and worm shaft
3) Less noise and lower temperature increase
4) Easy mounting and linking, high efficiency
5) Power: 0.06 – 15kW
6) Output torque: 2.7 – 1, 760Nm
7) Transmission rate: 5 – 100
Inner packing: Carton Outer packing: Wooden case
Reduction gear, worm gear, gear reducer

Parameter:

TYPE

D(k6)

N(j6)

M

O

P

P1

R

T

L

PC063

11(14)

70

85

40

105

140(63B5)

m6

 

 

3

23

PC071

14(19)

80

100

48

120

160(71B5)

m6

30

PC080

19(24\28)

110

130

62

160

200(80B5)

m8

40

PC090

24(19\28)

110

130

62

160

200(90B5)

m8

50

Speed gear reducer paramater 

  model   PAM IEC   N   M P   7.5D   10D   15D   20D   25D   30D   40D   50D 60D    80D
  NMRV030   63B5   95   115   140   11   11   11   11   11   11   11   /   /   /
  NMRV030   63B14   60   75   90   11   11   11   11   11   11   11   /   /   /
  NMRV030   56B5   80   100   120   9   9   9   9   9   9   9   9   9   9
  NMRV030   56B14   50   65   80   9   9   9   9   9   9   9   9   9   9
  NMRV040   71B5   110   130   160   14   14   14   14   14   14   14   /   /   /
  NMRV040 71B14    70   85   105   14   14   14   14   14   14   14   /   /   /
  NMRV040   63B5   95   115   140   11   11   11   11   11   11   11   11 11    11
  NMRV040   63B14   60   75   90   11   11   11   11   11   11   11 11    11   11
  NRMV050   90B5   130   165   200   19   19   19   19   19   /   /   /   /   /
  NRMV050   80B14   80   100   120   19   19   19   19   19   /   /   /   /   /
  NRMV050   71B5   110   130   160   14   14   14   14 14    14     14   14   14   14
  NRMV050   71B14   70   85   105   14   14   14   14   14   14   14   14   14   14
  NMRV063   90B5   130   165   200   24   24   24   24   24   24   /   /   /   /
    NMRV063   90B14   95   115   140   24   24   24   24   24   24   /   /   /   /
    NMRV063   80B5   130   165   200   19   19   19   19   19   19   19   19   /   /
    NMRV063   80B14   80   100   120   19   19   19   19   19   19   19   19   /   /
  NRMV075   100/112B5   180   215   250   28   28   28   /   /   /   /   /   /   /
  NRMV075   100/112B14   110   130   160   28   28   28   /   /   /   /   /   /   /
  NRMV075   90B5   130   165   200   24   24   24   24   24   24   24   /   /   /
  NRMV075   90B14   95   115   140   24   24   24   24   24   24   24   /   /   /
  NMRV090   100/112B5   180   215   250   /   /   /   /   24   24   24   24   24   24
    NMRV090   100/112B14   110   130   160   /   /   /   /   24   24   24   24   24   24
    NMRV090   90B5   130   165   200   /   /   /   /   /   /   /   19   19   19
    NMRV090   90B14   95   115   140   /   /   /   /   /   /   /   19   19   19

Detailed Photos

Our Advantages

We have more than 30years on all kinds of ac motors and gearmotor ,worm reducers producing ,nice price
What we do:

1.Stamping of lamination
2.Rotor die-casting
3.Winding and inserting – both manual and semi-automatically
4.Vacuum varnishing
5.Machining shaft, housing, end shields, etc…
6.Rotor balancing
7.Painting – both wet paint and powder coating
8.assembly
9.Packing
10.Inspecting spare parts every processing
11.100% test after each process and final test before packing.,

FAQ

1.Q:What information should i tell you to confirm the worm gearbox?
A:Model/Size,B:Ratio and output torque, C:Power and flange type,D:Shaft Direction,E:Housing color,F:Order quantity.

2.What type of payment methods do you accept?
A:T/T,B:B/L,C:CASH,etc 

3.What’s your warranty?
One year.

4.How to delivery?
A:By sea- Buyer appoints forwarder,or our sales team finds suitable forwarder for buyers.By air- Buyer offers collect express account,or our sales team fingds suitable express for buyers.(Mostly for sample) Other- We arrange to delivery goods to some place in China appointed by buyers.

5.Can you make OEM/ODM order?
Yes,we have rich experience on OEM/ODM order and like CHINAMFG Non-disclosure Agreement before sample making;

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Worm Gear
Step: Double-Step
Samples:
US$ 133.41/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

What is a Gearbox and How Does It Work?

A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.

Here’s how a gearbox works:

  1. Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
  2. Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
  3. Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
  4. Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.

Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.

China Good quality Hot Sale High Quality Low Noise Black Speed Gearbox Gear Reducer Box Worm Drive Shaft Gearbox with AC Motor gearbox and motor China Good quality Hot Sale High Quality Low Noise Black Speed Gearbox Gear Reducer Box Worm Drive Shaft Gearbox with AC Motor gearbox and motor
editor by CX 2024-05-07

China Custom Right Angle RV Series Electric Speed Reducer Motor Servo Worm Gear Reducer with high quality

Product Description

Why Choose Us

Product Details

Type

Worm Gear Speed Reducer/ gearbox

Model

WMRV 25/30/40/50/63/75/90/110/130/150/185

Ratio

7.5,10,15,20,25,30,40,50,60,80,100.

Color

Blue(RAL5571)/Silver grey (K9149) Or On Customer Request

Material

Housing: Aluminum alloy(size 25~90) / Cast iron(size 110~185)

Worm wheel: Aluminum Bronze or Tin Bronze

Worm shaft: 20CrMn Ti

Output Shaft: steel-45#

Packing

Carton, Honey Comb Carton, Wooden Case with wooden pallet
Warranty 1 Year
Input Power 0.09kw,0.18kw,1.1KW,1.5KW,2.2KW,3KW,4KW,5.5KW,7.5KW,11Kw and so on.
Usages Industrial Machine: Food Stuff, Ceramics, CHEMICAL, Packing, Dyeing,Wood working, Glass.
IEC Flange IEC standard flange or on customer request
Lubricant Synthetic oil or worm gear oil

 

 

Company Profile

Exhibition

Customized Service

Certificate&Honor

Customer Comments

FAQ

1. How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.

2. What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor information etc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.

3. What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.

4. Do you sell motors?
We have stable motor suppliers who have been cooperating with us for a long-time. They can provide motors
with high quality.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Function: Distribution Power, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Samples:
US$ 25/Piece
1 Piece(Min.Order)

|

Order Sample
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gearbox

Can I Use Synthetic Oil in My Gearbox?

Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:

  • Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
  • Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
  • Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
  • Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
  • Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
  • Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
  • Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.

However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.

China Custom Right Angle RV Series Electric Speed Reducer Motor Servo Worm Gear Reducer with high quality China Custom Right Angle RV Series Electric Speed Reducer Motor Servo Worm Gear Reducer with high quality
editor by CX 2024-05-06

China factory Worm Gearbox Motor Speed Reducer gearbox drive shaft

Product Description

Applications

Wide range of application,including light industry of food &beverage, Cement,
package,construction material,chemicals and etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gearbox

Steps to Replace a Faulty Gearbox in an Automobile

Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:

  1. Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
  2. Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
  3. Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
  4. Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
  5. Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
  6. Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
  7. Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
  8. Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
  9. Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
  10. Lower Engine: Carefully lower the engine back into its original position if it was suspended.
  11. Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
  12. Final Check: Double-check all connections and ensure that all components are properly secured.
  13. Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
  14. Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.

It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.

China factory Worm Gearbox Motor Speed Reducer gearbox drive shaft China factory Worm Gearbox Motor Speed Reducer gearbox drive shaft
editor by CX 2024-04-26

China Standard Fs Helical Worm Gear Reducer Gear Box with Motor Textile Machinery Reducer supplier

Product Description

Product Description

Introducing FR,FF, FK, and FS Series Gear Reducers and Gearmotors

Our FR, FF, FK, and FS series gear motors are designed to meet a vast spectrum of industrial requirements. These series are distinguished by their remarkable compactness, minimal noise output, high load-bearing capacity, low energy consumption, superior torque transmission, optimal efficiency, minimal temperature rise, and extended lifespan.

Customized Solutions for Diverse Needs
Embracing a philosophy of modular design and optimization, we are dedicated to fulfilling diverse customer needs across various applications. Multi-stage gear motors with additional helical gear input stages are supplied to achieve particularly low output speeds.

Advanced Material and Manufacturing Techniques
Gears and pinions are crafted from premium alloy steel, treated with carburization and quenching for enhanced durability. The high-precision gear grinding process, complemented by meticulous tooth profile modifications, guarantees a smooth transmission.

Versatile Installation and Output Options
Our gear reducers are designed for various mounting configurations including foot, flange, and torque arm installations. Output shaft options are versatile, offering both CHINAMFG and hollow shafts that can be adapted using either spline or locking disc connections for a secure and efficient power transfer.

Comprehensive Input Compatibility
Besides the integral connection with motor directly, CHINAMFG also provide AM motor flanges compliant with IEC, NEMA C faces compliant with Nema system, and AD CHINAMFG shaft input.
 

 

Company Profile

l  The largest manufacturer and exporter of worm gear reducers in Asia.

l  Established in 1976, we transformed from a county owned factory to private 1 in 1996. HangZhou SINO-DEUTSCH POWER TRANSMISSION EQUIPMENT CO.,LTD is our new name since 2001.

 

l  We are the first manufacturer of reducers and gearboxes in China who was given export license since year 1993.

 

l  “Fixedstar” brand gearboxes and reducers are the first owner of CHINA TOP BRAND and Most Famous Trade Mark for reducers.

First to achieve ISO9001 and CE Certificate among all manufacturers of gearboxes in China.
 

   
As a professional manufacturer of worm gearbox and worm gear reducers in China, we mainly produce reduction gearbox,aluminum case worm gearboxes,arc gear cylindrical worm gearboxes, worm gear reducers, in line helical gearboxes, and cyclo drive reducers, etc. These products feature rational structure, stable performance, and reliable quality, and so on. They are widely used in power, mining, metallurgy, building material, chemical, food, printing, ceramic, paper-making, tobacco, and other industries.

 

We have 600 workers in our factory, which covers 70,000 square CHINAMFG in HangZhou. We have been making 2,500 units of reducers everyday since 2012. We are proudly exporting 70% of our products to more than 40 countries all over the word. Our customers come from Italy, Germany, USA, Canada, Spain, UK, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries in the world. 30% of them are OEM made for direct manufacturers of other products. 

 

We warmly welcome customers from other parts of the world to visit us. Seeing is believing. We are very confident that after visiting our facility, you will have confidence on our products. We have the latest automatic equipments and experienced workers to ensure the stable quality and large output. We have the most sophisticated technical and engineering team to support most demanding requirement on standard and OEM products.
 

Looking CHINAMFG to meeting you in HangZhou, China.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Industry
Hardness: Hardened
Installation: Horizontal Type
Layout: Vertical
Gear Shape: Bevel Gear
Step: Double-Step
Customization:
Available

|

Customized Request

gearbox

Common Problems with Gearboxes and How to Troubleshoot Them

Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:

  1. Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
  2. Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
  3. Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
  4. Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
  5. Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
  6. Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
  7. Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
  8. Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
  9. Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
  10. Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.

Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.

China Standard Fs Helical Worm Gear Reducer Gear Box with Motor Textile Machinery Reducer supplier China Standard Fs Helical Worm Gear Reducer Gear Box with Motor Textile Machinery Reducer supplier
editor by CX 2024-04-24

China Hot selling Foot Mounting 220V 430W Single Phase AC Gear Motor Speed Reducer Gearbox with Good quality

Product Description

3 Phase AC Reducer Motor 1/2hp 220V 380V 400W Gear Precision Foot Mounted Reducer Motor

CV and CH series motor can be designed as Single phase and 3 phases type. And power range is from 0.1KW to 3.7KW. The motor can be mounted with brake, and brake type is No excitation type. Material of gears is advanced special alloy steel and all gears are carburizing hardening. This gear motor has been added with senior lubricants, and no needs to added lubricants again.

Helical gear reducer has the characteristics of strong versatility, good combination, and strong bearing capacity, and has the advantages of easy access to various transmission ratios, high efficiency, small vibration, and high allowable axial and radial loads.

This series of products can not only be used in combination with various reducers and vibrators to meet the requirements, but also has the advantage of localization of related transmission equipment.
 

Mostly used in metallurgy, sewage treatment,chemical, pharmaceutical and other industries.

 

Type CH series  three phase or single phase ac motors for industrial use 
Voltage 220VAC, 380VAC, 415VAC
Power range Power range is 0.1KW to 3.7KW
Output Speed Speed range is from 7rpm to 500rpm
Phase Single phase and 3phases for choice
Gears Special alloy steel and high precise gears
Grease Good grease and no need add grease during using
Cooling Full closed fan
USE This motor is widely used in
packing machine, textil machine		 motor is widely used in mix 
machine,elevator, conveyor,etc.
OEM Service We offer OEM service.

  

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Bevel Gear
Step: Three-Step
Samples:
US$ 70/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

How to Choose the Right Gearbox for Your Machinery

Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:

  1. Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
  2. Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
  3. Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
  4. Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
  5. Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
  6. Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
  7. Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
  8. Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
  9. Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
  10. Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
  11. Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.

Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.

China Hot selling Foot Mounting 220V 430W Single Phase AC Gear Motor Speed Reducer Gearbox with Good quality China Hot selling Foot Mounting 220V 430W Single Phase AC Gear Motor Speed Reducer Gearbox with Good quality
editor by CX 2024-04-09

China Standard Reducer Motor Helical Gear Customized Geared Motor Rubber Industry Gearbox gearbox drive shaft

Product Description

Detailed Images

Detailed Images of Helical Bevel Gear Helical Geared Motor

Detailed Video of Helical Bevel Gear Helical Geared Motor

 

Product Description

Description of Helical Gearbox Geared Motor

Available Ratios: more than 100 ratios from 3.83 – 229.71
Maximum power: 160KW
Maximum Output Torque: 23,200Nm

-Modularized gears and pinions;
-Additional option of IEC adaptors allowing use of both standard Nema or IEC motors;
-High precision helical gears and shafts made of 20CrMnTi alloy steel, heat treated with carburizing and quenching, ground finish,
in compliance with ISO 1328-1997;
-98% Efficiency in each stage;
-Cast iron housing and covers durable for heavy load and torque;

The integrated design of modular motor and reducer can realize rapid delivery;
The input and output shafts are right angled, with compact structure and low noise;
Possibility of mounting positions and methods in all directions and sides;

Gearbox case is made of high-strength gray cast iron, with good stiffness and excellent vibration damping performance;
Gears and pinions are made of high strength alloy steel. Treated with carburization, quench and hardening, the surface hardnessreaches HRC58-62;

All gears and pinions are modified and grinded by CNC grinding equipment to improve the strength and reduce the noise;
Optimized structure designed for noise reduction and faster cooling.

Different Mounting Positions of Helical Gearbox Geared Motor

Packing & Delivery

Packaging Pictures of Helical Gearbox Geared Motor

 

Inner Packing: PP bag with carton;
Outer Packing: Carton boxes and wooden cases;
Leadtime: 20-30 days CHINAMFG order confirm.

About Us

Formerly known as HangZhou Reducer Factory, CHINAMFG Group was founded in 1976.

Presently, our commitment extends beyond manufacturing as we engage in diligent research and trading endeavors. Our primary focus centers on power transmission products, constituting the core of our business operations.

Having invested a total of 2 billion Yuan in land spHangZhou an impressive 200,000 square meters, our workforce of 1000 dedicated employees now produce over 3,500 distinct types of gearboxes each day, serving the global market.

With unwavering commitment to research and development over a span of 45 years, CHINAMFG takes great pride in holding the esteemed distinction of being the largest manufacturer of small and medium-sized speed reducers in Asia.

Our main products range from Worm Gear Reducers, Helical Gear Reducers, Helical Bevel Reducers, Shaft Mounted Reducers to Slewing drives and more.

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Bevel Gear
Step: Double-Step
Customization:
Available

|

Customized Request

gearbox

What is a Gearbox and How Does It Work?

A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.

Here’s how a gearbox works:

  1. Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
  2. Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
  3. Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
  4. Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.

Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.

China Standard Reducer Motor Helical Gear Customized Geared Motor Rubber Industry Gearbox gearbox drive shaft China Standard Reducer Motor Helical Gear Customized Geared Motor Rubber Industry Gearbox gearbox drive shaft
editor by CX 2024-03-28

China wholesaler Hydraulic Motor Planetary Speed Reducer Gearbox gearbox adjustment

Product Description

hydraulic motor planetary speed reducer gearbox 

Product description:

Daixin planetary reducer gearbox is designed with large torque, high start and transmission efficiency, low-speed stability, compact radial size, low noise, etc.

The main devices we are making are walking reducers, lifting reducers and swing reducers.

They are widely used for vehicle cranes, crawler cranes, truck mounted cranes, marine cranes, aerial work trucks, excavators, etc.
 

 

 

Product Travel drive planetary reducer
Model DX14
Max. output torque 13800 Nm
Ratio 14.42:1
Max. input torque 939 Nm
Max. input speed 317 r/min
Max. output speed 25 r/min
Application final drive for winch of various cranes, trucks, crawler cranes, truck cranes, etc
OEM  Acceptable

 

 

Product features:
 

1.Compact size
2.Low noise
3.High start-up and working efficiency
4.Easy installation, operation and maintenance
5.Various models for wide applications
6.One year warranty 
7.Free components for replacement within warranty period
8.Professional and tailored solution for different requirements
9.Free technical support at any time
10.Customer training is available.

 

Packing and delivery details:

Packing method: plywood box (1 pc / box)
Packing Dimensions: 660*440*500 mm
Weight: 150 kg

 

 

 

Company details:

ZheJiang CHINAMFG Intelligent Technology Co., Ltd is a scientific and technological enterprise engaged in the research, development and production of planetary gear transmission products, like slewing reducers, Travel drive reducers, lifting winch reducers, hydraulic winches, etc.

The company has always put quality management as the top priority of the company’s development. The products are manufactured not only meet the international ISO 4301 and ISO9001 standards, but also meet the US SAE J706 and the European Union CE standards. 

Daixin Intelligent Technology relies on quality, reputation and service to develop, cultivate and consolidate the national and global markets. Be our partners and be our friends.
 

 

 

 

Our clients:

The company relies on quality, reputation and service to develop, cultivate and consolidate the national and global markets.

Currently, the cooperative customers include: the famous construction machinery manufacturers Zoomlion, the largest wrecker manufacturer ZheJiang CHINAMFG Company, and the largest high-altitude vehicle manufacturer HangZhou Handler Company.

Products are also exported to Russia, Belarus, Spain, UK, Canada, Australia, India, Malaysia and other countries.
 

 

 

 

FAQ:

1.How to choose the product which meets our requirement?
A) Look through our shop, find a proper item, send me an inquiry, I quote details for you.
B) In case no suitable item in our shop, send me an inquiry with your requirements, we can customize for you.  

2.What is payment term?
A) For regular design: 30% deposit, the balance before loading.
B) For customized design: 50% deposit, the balance before loading.
Payment term is negotiable according to order. 

3.What is delivery time?
A) For common models in stock, delivery time are 5-7 days.
B) For customized models and new production, delivery time are 30-40 days.

5.How about after-sale service?
A) Within warranty, all spare parts are delivered for free.
B) Exceed warranty, all spare parts are offered with the lowest production cost.
Warranty period is 1 year, but our servicing is for the whole lifetime of product, so no worry for reselling and personal resell.

 

Thank you for the time. For any question or requirements, please contact me 🙂
 

 

 

Application: Machinery, Winch
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step
Customization:
Available

|

Customized Request

gearbox

Is it Better to Repair or Replace a Damaged Gearbox?

Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:

  • Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
  • Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
  • Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
  • Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
  • Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
  • Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
  • Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.

Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.

China wholesaler Hydraulic Motor Planetary Speed Reducer Gearbox gearbox adjustment China wholesaler Hydraulic Motor Planetary Speed Reducer Gearbox gearbox adjustment
editor by CX 2023-10-24

China Professional China High Torque Helical Gear Motor Nmrv Wp Speed Reducer Reductor Worm Gearbox with Best Sales

Product Description

China High Torque NMRV Speed Reducer Reductor Worm Gearbox 

Introduction of worm gearbox

1.     Made of high-quality aluminum alloy or iron casting housing, light in weight and non-rusting

2.     Smooth in running and low in noise, can work long time in dreadful conditions

3.     High in radiating efficiency

4.     Good-looking in appearance, durable in service life and small in volume

5.     Suitable for omni-bearing installation

6.    Inch size and metric size are both available

Company Overview

 
HISTORY: Greensky is a mechanical brand of CHINAMFG Power Co., Ltd. With over 10 years’
mechanical manufacturing experiences, CHINAMFG Power always strictly stands on the
principle of Best Customer Satisfaction.

QUALITY: Material Inspection, Production Control, Finished Goods Test, Pre-dellivery Inspection

MISSION: “Once and forever” is our goal to serve customers in the world. Once we do
business with customer, we will do business forever.

MARKET: 30 different countries, mainly Germany, Austria, Japan, USA and Middle-East.

DELIVERY: 100% on-time delivery Guaranteed.

SERVICES: Fast response in English, German, Japanese and Chinese languages.

OEM: Customized orders are welcome at CHINAMFG Power.
  

Certificates

Exhibitions

Greensky Product Portfolio: 

FAQ

1 Q: What’s your MOQ?
   A: 1unit is ok for different types. 

2 Q: What about your warranty?
   A: One year.

3 Q: Do you provide OEM service with customer-logo?
   A: Yes, we could do OEM orders, but we mainly focus on our own brand.

4 Q: How about your payment terms ?
   A: TT, western union and paypal. 100% payment in advanced for orders less $5,000. 30% deposit and balance before delivery for orders over $5,000.

5 Q: How about your packing ?
   A: Carton, Plywood case. If you need more, we can pack all goods with pallet 

Warmly welcome your inquiry and visit our factory in China.

Application: Motor, Machinery, Agricultural Machinery, Light Duty Machine
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened
Installation: Horizontal Type
Step: Double-Step
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Steps to Replace a Faulty Gearbox in an Automobile

Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:

  1. Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
  2. Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
  3. Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
  4. Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
  5. Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
  6. Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
  7. Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
  8. Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
  9. Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
  10. Lower Engine: Carefully lower the engine back into its original position if it was suspended.
  11. Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
  12. Final Check: Double-check all connections and ensure that all components are properly secured.
  13. Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
  14. Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.

It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.

China Professional China High Torque Helical Gear Motor Nmrv Wp Speed Reducer Reductor Worm Gearbox with Best Sales China Professional China High Torque Helical Gear Motor Nmrv Wp Speed Reducer Reductor Worm Gearbox with Best Sales
editor by CX 2023-10-12