Tag Archives: gearbox differential

China Good quality Advanced Technology Low Price Harmonic Drive Gearbox differential gearbox

Product Description

Product Overview

WAD series — Helical Gear Planetary

Feature
a. Planetary boom and output shaft are intergrated structure designed to ensure maximum torsional rigidity.
b. Planetary gear with full needle design, increases contact area to improve rigidity and output torque
c. The gears are carburized and quenched to HRC62 with low carbon steel surface for optimum wear and impact toughness
d. Gears refer to oversea imported software-assisted design to obtain the best booth shape to reduce noise
e. The input end is connected with motor shaft in a double-tight method to obtain the maximum clamping force and zero backlash
transmission.

FEATURES AT A GLANCE

Advantage
High input speed: maxium 10000rpm
Low backlash: 1-stage, P<2arcmin; 2-stage, P<3arcmin
Low noise: exquisite design, precision manufacturing, noise below 63dB(A)
High ratio: modular design, planetary gearboxes can be conbined to reach high speed ratio
High transmission efficiency: >97%

Right elevation

Left elevation

Front elevation

PRODUCT SPECIFICATIONS

Size: 42 / 60 / 90 / 115 / 140 / 180 / 220 (mm)
Ratio: 3~100
Maximum input speed: 10000 rpm
Backlash:
stage 1 (ratio 3-10): P1≤ 3 arcmin P2≤ 5 arcmin
stage 2 (ratio 15-100): P1≤ 5 arcmin P2≤ 8 arcmin
Noise level: ≤ 63dB
IP Grade: IP65

Life span: 20000hSize:

SALES AND SERVICE NETWORK

Successful Project

Project in Thailand

Project in India

Project in Russia

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Layout:	Shunting
Gear Shape:	Bevel Gear
Step:	Stepless

Steps to Replace a Faulty Gearbox in an Automobile

Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:

Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
Lower Engine: Carefully lower the engine back into its original position if it was suspended.
Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
Final Check: Double-check all connections and ensure that all components are properly secured.
Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.

It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.

China Good quality Advanced Technology Low Price Harmonic Drive Gearbox differential gearbox
editor by CX 2024-04-30

China factory Bevel Helical Gearbox with Permanent Magnet Synchronous Motor Integrate Variable Frequency Driver with Foot Mounted differential gearbox

Product Description

Bevel helical gearbox with permanent magnet synchronous motor integrate variable frequency driver for conveyor

SNKG Series prorduct adopt harden teeth surface bevel gear and helical gear to drive, following the design principle of modularization , FEA analyse technology, unique low-noise gear tooth profile, with the characteristics of compact volume, high load performance and stable running, reliability and long service life.

Key Benefits
-Simple wiring, low cost
-Large amount of data, fast speed, 100m, data transmission is 500K
-All control units have the same condition, it means each node has the same rights to occupy the bus (send and receive)
-Communication rate meets control requirements, communication data amount supports required data reading.
-Electric eye and proximity switch sensor supply signal to the driver directly, it is convenient and reliable.

About Us

ZheJiang CHINAMFG Drive Co.,Ltd(Starshine) have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our Team

Quality Control
Quality:Insist on Improvement,Strive for CHINAMFG With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of CHINAMFG
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.

Packing

Delivery

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Machinery, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout:	Helical Bevel
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Three-Step

Samples:	US$ 569/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

gearbox

Benefits of Regular Gearbox Maintenance

Regular maintenance of gearboxes offers numerous advantages:

Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.

Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.

China factory Bevel Helical Gearbox with Permanent Magnet Synchronous Motor Integrate Variable Frequency Driver with Foot Mounted differential gearbox
editor by CX 2024-04-30

China manufacturer Gpb090 Planetary Double-Step CZPT Carton Wenzhou Right Angle Gearbox Robot differential gearbox

Product Description

TaiBang Motor Industry Group Co., Ltd.

The main products is induction motor, reversible motor, DC brush gear motor, DC brushless gear motor, CH/CV big gear motors, Planetary gear motor ,Worm gear motor etc, which used widely in various fields of manufacturing pipelining, transportation, food, medicine, printing, fabric, packing, office, apparatus, entertainment etc, and is the preferred and matched product for automatic machine.

Taibang planetary gear motor is high energy efficiency,low noise,long service life,which is widely used in various industry.

Model Instruction

090

571

Reducer Series Code

External Diameter

Reduction Ratio

Reducer Backlash

GB:High Precision Square Flange Output

GBR:High Precision Right Angle Square Flange Output

GE:High Precision Round Flange Output

GER:High Precision Right Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
155:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm

571 means 1:10

P0:High Precision Backlash

P1:Precison Backlash

P2:Standard Backlash

Main Technical Performance

Item	Number of stage	Reduction Ratio	GB042	GB060	GB060A	GB090	GB090A	GB115	GB142	GB180	GB220
Rotary Inertia	1	3	0.03	0.16		0.61		3.25	9.21	28.98	69.61
		4	0.03	0.14		0.48		2.74	7.54	23.67	54.37
		5	0.03	0.13		0.47		2.71	7.42	23.29	53.27
		6	0.03	0.13		0.45		2.65	7.25	22.75	51.72
		7	0.03	0.13		0.45		2.62	7.14	22.48	50.97
		8	0.03	0.13		0.44		2.58	7.07	22.59	50.84
		9	0.03	0.13		0.44		2.57	7.04	22.53	50.63
		10	0.03	0.13		0.44		2.57	7.03	22.51	50.56
	2	15	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		20	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		25	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		30	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		35	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		40	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		45	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		50	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		60	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		70	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		80	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		90	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		100	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51

Item		Number of stage	GB042	GB060	GB060A	GB90	GB090A	GB115	GB142	GB180	GB220
Backlash(arcmin)	High Precision P0	1				≤1	≤1	≤1	≤1	≤1	≤1
	High Precision P0	2						≤3	≤3	≤3	≤3
	Precision P1	1	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3
	Precision P1	2	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	1	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	2	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7
Torsional Rigidity(N.M/arcmin)		1	3	7	7	14	14	25	50	145	225
Torsional Rigidity(N.M/arcmin)		2	3	7	7	14	14	25	50	145	225
Noise(dB)		1,2	≤56	≤58	≤58	≤60	≤60	≤63	≤65	≤67	≤70
Rated input speed(rpm)		1,2	5000	5000	5000	4000	4000	4000	3000	3000	2000
Max input speed(rpm)		1,2	10000	10000	10000	8000	8000	8000	6000	6000	4000

Noise test standard:Distance 1m,no load.Measured with an input speed 3000rpm

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Machinery, Agricultural Machinery, Automatic Machinery
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Double-Step

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

gearbox

How to Calculate Gear Ratio in a Gearbox

Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:

Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear

Here’s a step-by-step guide on how to calculate gear ratio:

Identify the input and output gears in the gearbox.
Count the number of teeth on the output gear (the gear connected to the output shaft).
Count the number of teeth on the input gear (the gear connected to the input shaft).
Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
Calculate the gear ratio by performing the division.

The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.

China manufacturer Gpb090 Planetary Double-Step CZPT Carton Wenzhou Right Angle Gearbox Robot differential gearbox
editor by CX 2024-04-16

China Professional Smart Home Electric Window Opener 24mm 24V Micro High Torque Brushless Gearbox Motor Drive Actuator for Automatic Smart Window differential gearbox

Product Description

Glider Cabinet Drive System

Product Description:

Window Actuator Motor

Voltage : 24V
Current : 1200 mA
Load Speed :1.6±20%RPM
Operating Life :≥167H
Torque:20 N.M
Power:25W

Product name: Glider Cabinet Drive System

Indroduction

A window actuator is an advanced electromechanical device that enables automatic window opening and closing and has the advantages of being simple to install and operate. However, the majority of window actuators available on the market are not secure and stable enough and are susceptible to a number of issues like noise and insufficient torque after extended use, which gives users a bad experience when opening and closing windows.

To address the existing issues, CHINAMFG launches a drive solution for the window actuator. CHINAMFG modifies the transmission system of the geared motor as well as the planetary gearbox and adopts a precise double clutch structure to achieve better stability and safety based on years of research in the field of micro drive systems. Furthermore, after gearbox drive optimization, it has low noise and high torque characteristics to improve the user experience and enjoy a smart and beautiful life.

above specifications just for reference and customizable according to requirements.

product details show:

To solve this problem, we try to add an intelligent self-locking function to the circuit breaker controller of the electronic meter. Taking into account that the internal space of the smart controller of the electric meter is relatively small, the gear motor should drive the stable operation of the loop control system in a limited space, and it is only allowed to rotate in the specified direction and cannot go backwards. We use 10mm planetary gearheads and turbine inserts to be injected into the loop controller gearbox, so that the transmission structure has the characteristics of small size, large torque and can meet the needs of self-locking function. The loop controller gearbox in this scheme can realize the reverse self-locking of the electric meter, which can only transmit the power of the active end of the motor without responding to the external load, thereby isolating the external load from the smart meter’s own mechanism. In case of possible damage, the smart meter can be stopped at the gear motor (also called the gear motor of the loop controller) to increase the service life of the smart meter, solve the problem of data loss when the power is suddenly cut off, and protect the safety of the data.

Application

Smart wearable devices	watch,VR,AR,XR and etc.
Household application	kitchen appliances, sewing machines, corn popper, vacuum cleaner, garden tool, sanitary ware, window curtain, intelligent closestool, sweeping robot, power seat, standing desk, electric sofa, TV, computer, treadmill, spyhole, cooker hood, electric drawer, electric mosquito net, intelligent cupboard, intelligent wardrobe, automatic soap dispenser, UV baby bottle sterilizer, lifting hot pot cookware, dishwasher, washing machine, food breaking machine, dryer, air conditioning, dustbin, coffee machine, whisk,smart lock,bread maker,Window cleaning robot and etc.
communication equipment	5G base station,video conference,mobile phone and etc.
Office automation equipments	scanners, printers, multifunction machines copy machines, fax (FAX paper cutter), computer peripheral, bank machine, screen, lifting socket, display,notebook PC and etc.
Automotive products	conditioning damper actuator, car DVD,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster, car water pump, car antenna, lumbar support, EPB, car tail gate electric putter, HUD, head-up display, vehicle sunroof, EPS, AGS, car window, head restraint, E-booster, car seat, vehicle charging station and etc.
Toys and models	radio control model, automatic cruise control, ride-on toy, educational robot, programming robot, medical robot, automatic feeder, intelligent building blocks, escort robot and etc.
Medical equipments	blood pressure meter, breath machine, medical cleaning pump, medical bed, blood pressure monitors, medical ventilator, surgical staplers, infusion pump, dental instrument, self-clotting cutter, wound cleaning pump for orthopedic surgery,electronic cigarette, eyebrow pencil,fascia gun, , surgical robot,laboratory automation and etc.
Industrials	flow control valves, seismic testing,automatic reclosing,Agricultural unmanned aerial vehicle,automatic feeder ,intelligent express cabinet and etc.
Electric power tools	electric drill, screwdriver,garden tool and etc.
Precision instruments	optics instruments,automatic vending machine, wire-stripping machine and etc.
Personal care	tooth brush, hair clipper, electric shaver, massager, vibrator, hair dryer, rubdown machine, scissor hair machine, foot grinder,anti-myopia pen, facial beauty equipment, hair curler,Electric threading knife,POWER PERFECT PORE, Puff machine,eyebrow tweezers and etc.
Consumer electronics	camera, mobile phone,digital camera, automatic retracting device,camcorder, kinescope DVD,headphone stereo, cassette tape recorder, bluetooth earbud charging case, turntable, tablet,UAV(unmanned aerial vehicle),surveillance camera,PTZ camera, rotating smart speaker and etc.
robots	educational robot, programming robot, medical robot, escort robot and etc.

Our Services:

ODM & OEM
Gearbox design and development
Related technology support

Packaging & Shipping

1) Packing Details

packed in nylon firstly, then carton, and then reinforced with wooden case for outer packing.
Or according to client’s requirement.

2) Shipping Details

samples will be shipped within 10 days;
batch order leading time according to the actual situation.

Company Information:

HangZhou CHINAMFG Machinery & Electronics Co., Ltd was established in 2001,We provide the total drive solution for customers from design, tooling fabrication, components manufacturing and assembly.

1) Competitive Advantages

1) Competitive Advantages
17+year experience in manufacturing motor gearbox
We provide technical support from r&d, prototype, testing, assembly and serial production , ODM &OEM
Competitive Price
Product Performance: Low noise, High efficiency, Long lifespan
Prompt Delivery: 15 working days after payment
Small Orders Accepted

2) Main Products

Precision reduction gearbox and its diameter:3.4mm-38mm,voltage:1.5-24V,power: 0.01-40W,output speed:5-2000rpm and output torque:1.0 gf.cm -50kgf.cm,
Customized worm and gear transmission machinery;
Precise electromechanical motion module;
Precise component and assembly of plastic and metal powder injection.

Certifications

We Have passed to hold ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).

and more…

FAQ

1. Can you make the gearbox with custom specifications?
YES. We have design and development team, also a great term of engineers, each of them have
many work years experience.

2.Do you provide the samples?
YES. Our company can provide the samples to you, and the delivery time is about 5-15days according to the specification of gearbox you need.

3.What is your MOQ?
Our MOQ is 2000pcs. But at the beginning of our business, we accept small order.

4. Do you have the item in stock?
I am sorry we donot have the item in stock, All products are made with orders.

5. Do you provide technology support?
YES. Our company have design and development team, we can provide technology support if you
need.

6.How to ship to us?
We will ship the goods to you according to the DHL or UPS or FEDEX etc account you provide.

7.How to pay the money?
We accept T/T in advance. Also we have different bank account for receiving money, like US dollors or RMB etc.

8. How can I know the product is suitable for me?
Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.

9. Can I come to your company to visit?
YES, you can come to our company to visit at anytime, and welcome to visit our company.

10. How do contact us ?
Please send an inquiry

Application:	Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed:	Constant Speed
Excitation Mode:	Compound
Function:	Control, Driving
Casing Protection:	Open Type
Number of Poles:	12

Customization:	Available \| Customized Request

gearbox

How to Calculate Gear Ratio in a Gearbox

Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear

Here’s a step-by-step guide on how to calculate gear ratio:

Identify the input and output gears in the gearbox.
Count the number of teeth on the output gear (the gear connected to the output shaft).
Count the number of teeth on the input gear (the gear connected to the input shaft).
Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
Calculate the gear ratio by performing the division.

The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.

China Professional Smart Home Electric Window Opener 24mm 24V Micro High Torque Brushless Gearbox Motor Drive Actuator for Automatic Smart Window differential gearbox
editor by CX 2023-10-18

China supplier CZPT Series Single-Screw Gearbox for Plastic Extruder differential gearbox

Product Description

Detailed Photos

Product Description

Product Features

1, The gear is made of high-strength low-carbon alloy steel by carburizing and quenching. The hardness of
the tooth surface is up to HRC58-62. The gears are groun d grinding technology with high precision and
good contact.
2, High transmission efficiency: CHINAMFG is greater than 96.5%, double level is greater than 93%, third
level is greater than 90%.
3, Smooth operation and low noise.
4, Small size, light weight, long service life and high carrying capacity.
5, Easy to disassemble and easy to install.

Our Advantages

Product Parameters

No.

gearbox model

Ratio range

recommend screw diameter/mm

recommend power/HP

rating load torque/N.m

size(L*W*H)/mm

Net weight/KG

ZLYJ133

8/12.5/16/20

35/45/50

6~15

764

478*170*260

144

ZLYJ146

10/12.5/16/20

45/55

10~20

1165

560*250*320

205

ZLYJ173

10/16/20

55/65

15~30

1962

576*256*340

256

ZLYJ180

15~40

2764

650*256*400

350

ZLYJ200

12.5/16/20

65/75

30~60

3583

750*340*480

350

ZLYJ225

12.5/16/20

40~75

5334

800*360*500

650

ZLYJ250

16/12.5/20

100

50~100

6306

930*380*560

815

ZLYJ280

16/12.5/20

105/110

75~122

7643

970*410*600

1571

ZLYJ315

16/12.5/20

120

100~175

11822

1160*450*700

1410

ZLYJ330

16/12.5/20

150/160

150~217

21000

1160*450*700

1520

ZLYJ375

16/12.5/20

150/160

217~312

21096

1280*466*800

1800

ZLYJ420

16/12.5/20

150/165

272~428

25478

1420*550*920

1800

ZLYJ450

16/12.5/20

165

380~544

33885

1550*1200*1000

3560

Certifications

Company Profile

Xihu (West Lake) Dis.ng Transmission Equipment Co., Ltd. located HangZhou city, ZHangZhoug, as 1 professional
manufacturer and exporter of cycloidal pin wheel reducer,worm reducer, gear reducer, gearbox ,
AC motor and relative spare parts, owns rich experience in this line for many years.

We are 1 direct factory, with advanced production equipment, the strong development team and
producing capacity to offer quality products for customers.

Our products widely served to various industries of Metallurgy, Chemicals, textile,medicine,wooden
etc. Main markets: China, Africa,Australia,Vietnam, Turkey,Japan, Korea, Philippines…

Welcome to ask us any questions, good offer always for you for long term business.

FAQ

Q: Are you trading company or manufacturer?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.

Q: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.

Q:How to choose a gearbox which meets your requirement?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.

Q: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.

Application:	Motor, Machinery, Marine, Agricultural Machinery
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Layout:	Coaxial
Gear Shape:	Bevel Gear
Step:	Single-Step

gearbox

What is a Gearbox and How Does It Work?

A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.

Here’s how a gearbox works:

Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.

Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.

China supplier CZPT Series Single-Screw Gearbox for Plastic Extruder differential gearbox
editor by CX 2023-09-23

China manufacturer Gearbox Gimbal Coupling differential gearbox

Product Description

gearbox Gimbal coupling

Coupling connects 2 shafts so that the appropriate safety rules for a mechanical device before turning pass. General order for flexible couplings can be divided into 2 categories with rigid coupling. When 2 power transmission shafts to be configured in a straight line when trouble occurs, or when you install the 2 axes of the very simple, you should use a flexible coupling, it has eased absorb parallel, angle, axial difference, improving power transmission system features, so in the installation, even if a few of the axis deviation occurs while bearing situation would not be forced, in the market, is widely used, and can not be caused by a rigid coupling components for eccentricity, declination, the make 2 shafts are connected integrally fixed, and therefore must use very high concentricity.

Chosen on the basis of mechanical coupling required features, system operation to choose the appropriate model:.

1. Torque Size: coupling the drive shaft torque maximum torque should be twice as large as, for example: If the drive torque is 5 (Nm), should be used torsion is 10 (Nm) couplings, materials with steel torsion better.
2. twisted / stiffness: flexible coupling absorbs parallel deviation angle deviation, axial deviation, no high rigid coupling, so that the shaft must be very high precision single-ended.
3. The plant where applicable – high and low acid bases: Coupling of materials must carefully choose whether high temperature of acid-base load plant together..
4. The presence of Backlash
5. insulation
6. shock resistance
7. The maximum speed
8. With the machine’s safety protection
9. aperture range is applicable

Connection:	Female
Structure:	Gear
Flexible or Rigid:	Flexible
Material:	Stainless Steel
Standard:	Standard
Transport Package:	Standard Export Package

Customization:	Available \| Customized Request

gearbox

How to Choose the Right Gearbox for Your Machinery

Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:

Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.

Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.

China manufacturer Gearbox Gimbal Coupling differential gearbox
editor by CX 2023-09-22

China Hot selling CZPT Marine Gearbox 135 in Stock differential gearbox

Product Description

HangZhou ADVANCE Gearbox

Input Speed	1000~2500r/min
Reduction Ratio (i)	1.48,1.94,2.45	Transmission Capacity (kW/r/min)	0.1
	2.96		0.09
	3.35		0.08
Maneuver Type	Push-pull flexible Shaft, Electric control
Center Distance	180mm
Rated Thrust	25KN
L×W×H	432440650mm
Net Weight	225kg
Coupling Flywheel	6135Ca,SAE14/11.5
Coupling Housing	6135Ca,SAE1/2/3

Description

Marine Gearbox 120B possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and easy in dismantle & reassemble and maintain.

1.Processing
Orders are usually packed and ready to ship in 1 to 3 business days if the products are in stock. However shipments are subiect to required manufacturing time and customs clearance procedures. which can cause delays beyond original delivery estimates. For detailed delivery information, please contact customer service.
2.Packing Methods
Normally we use wooden boxes for packaging or we can pack it according to your special needs.
3.Shipping Methods
We are happy to offer a variety of shipping methods. Shipping methods available: EXW. FOB.CER. CIF.
4. International Returns & Exchanges
Unfortunately we can’t accept retums on intemational orders. We will test each product before dellverv One-year manufacturer warranty is quaranteed on our complete machines and 3 months on spare parts. I1 you have any concerns with your order, please reach out to customer service
5.Payment Methods
We sugqest 50/50 T/T payment method: 50 percent down payment on placement of the order, with the remaining 50% due CHINAMFG shipment. We also accept L/C, Trade Assurance, Visa transfer and Paypal

Application:	Machinery, Marine
Function:	Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Single-Step
Type:	Gear Reducer

gearbox

Different Types of Gearboxes and Their Applications

There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:

Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.

Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.

China Hot selling CZPT Marine Gearbox 135 in Stock differential gearbox
editor by CX 2023-09-14

China Custom Hot Sale Agricultural 90 Degree Farm Pto Right Angle Gearbox for Tractor Slasher Rotary Tiller PGA Feeder Mixer Earth Auger differential gearbox

Product Description

motor vehicle wheel machining parts

Product Description

1. Precision CNC machining parts strictly follow customers’ drawing, packing, and quality requirements.
2. Tolerance: between+/-0.01mm;
3. The high-tech CMM inspector to ensure the quality;
4. Full-Experienced engineers and well professional trained workers;
5. Fast delivery time;
6. Professional advice for our customers;

Detailed Photos

Product Parameters

Our advantage of cnc machining:

Business Type

Beyond the Manufacturer and strong organized ability in the industrial

Benefits

1. Deeper industrial experience at CNC machining parts service for more than 10-years,our customer’s requirement is our 1st priority.
2. 2D or 3D files is available;
3. We trust the quality priority and we insist the good quality should be based on the customers’ satisfied;
4. Without any MOQ requirement;
5.Faster delivery time;
6. Customized size and specification /OEM available
7. Near ZheJiang Port

The material

Materials Accept	Stainless Steel	SS201, SS303, SS304, SS316 etc.
	Steel	Q235, 20#, 45#,
	Brass	C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37) , C28000(CuZn40)
	Iron	1213, 12L14,1215 etc.
	Bronze	C51000, C52100, C54400, etc.
	Aluminum	Al6061, Al6063,AL7075,AL5052 etc
	Plastic	ABS,POM,PC(Poly-Carbonate),PC+GF,PA(nylon),PA+GF, PMMA(acrylic)PEEK,PEI etc)

Packaging & Shipping

We prefer DHL or TNT express or other air freight between 1kg-100kg.
we prefer sea freight more than 100kg or more than 1CBM
As per customized specifications.

Company Profile

About us
HangZhou CHINAMFG Technology Co.,Ltd is located in HangZhou City, ZheJiang Province, Which closed the ZheJiang .The Emitech Technology is mainly engaged in the CNC Machinery Industrial Service for 15 years. Our Parts are sold to Europe, America, Japan, South Korea and China in various kinds of industrial.At present, Our company has CNC Turning machines and CNC centers and equip with professional quality and testing instruments.We have full OEM Experience from worldwide, providing them with One-stop solutions for a broad range of applications.We look CHINAMFG to cooperating with you!

Our Advantages

1. Precision CNC machining parts strictly follow customer’s drawing,packing and quality requirement.
2. Tolerance: between+/-0.01mm;
3. The high-tech CMM inspector to ensure the quality;
4. Full-Experienced engineers and well professional trained workers;
5. Fast delivery time;
6. Professional advice for our customers;

After Sales Service

china made industrial machine parts
We usually provide 12 Months repair service. If our duty, we will respond to send the new parts.

Our Service

Our Processing	CNC center, CNC milling, CNC turning, drilling, grinding, bending, stamping, tapping,
Surface finish	Polishing, sandblasting, Zinc-plated, nickel-plated, chrome-plated, silver-plated, gold-plated, imitation gold-plated,
Tolerance	0.05mm~0.1mm
QC System	100% inspection before shipment
Drawing format	CAD / PDF/ DWG/ IGS/ STEP
Packaging	Plastic bag/Standard package / Carton or Pallet / As per customized specifications
Payment Terms	30 -50%T/T in advance, 70-50% balance before delivery; Pay Pal or Western Union is acceptable.
Trade terms	EXW, FOB, CIF, As per the customer’s request
Shipment Terms	1)We prefer DHL or TNT express or other air freight between 1kg-100kg. 2) we prefer sea freight more than 100kg or more than 1CBM 3) As per customized specifications.
Note	The CNC machining parts are usually custom-made based on the customer’s drawings and samples. So we need the Down Payment

After-sales Service:	Repaire
Warranty:	Half a Year
Condition:	New
Certification:	CE, RoHS, GS, ISO9001
Standard:	DIN, ASTM, GOST, GB, JIS, ANSI
Customized:	Customized

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

gearbox

What is a Gearbox and How Does It Work?

Here’s how a gearbox works:

Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.

Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.

China Custom Hot Sale Agricultural 90 Degree Farm Pto Right Angle Gearbox for Tractor Slasher Rotary Tiller PGA Feeder Mixer Earth Auger differential gearbox
editor by CX 2023-09-12

China factory Powder Metallurgy Gearbox, Iron Transmission Gear Gearbox differential gearbox

Product Description

Excellent powder metallurgy parts metallic sintered parts
We could offer various powder metallurgy parts including iron based and copper based with top quality and cheapest price, please only send the drawing or sample to us, we will according to customer’s requirement to make it. if you are interested in our product, please do not hesitate to contact us, we would like to offer the top quality and best service for you. thank you!

How do We Work with Our Clients
1. For a design expert or a big company with your own engineering team: we prefer to receive a fully RFQ pack from you including drawing, 3D model, quantity, pictures;

2. For a start-up company owner or green hand for engineering: just send an idea that you want to try, you don’t even need to know what casting is;

3. Our sales will reply you within 24 hours to confirm further details and give the estimated quote time;

4. Our engineering team will evaluate your inquiry and provide our offer within next 1~3 working days.

5. We can arrange a technical communication meeting with you and our engineers together anytime if required.

Place of origin:	Jangsu,China
Type:	Powder metallurgy sintering
Spare parts type:	Powder metallurgy parts
Machinery Test report:	Provided
Material:	Iron,stainless,steel,copper
Key selling points:	Quality assurance
Mould type:	Tungsten steel
Material standard:	MPIF 35,DIN 3571,JIS Z 2550
Application:	Small home appliances,Lockset,Electric tool, automobile,
Brand Name:	OEM SERVICE
Plating:	Customized
After-sales Service:	Online support
Processing:	Powder Metallurgr,CNC Machining
Powder Metallurgr:	High frequency quenching, oil immersion
Quality Control:	100% inspection

The Advantage of Powder Metallurgy Process

1. Cost effective
The final products can be compacted with powder metallurgy method ,and no need or can shorten the processing of machine .It can save material greatly and reduce the production cost .

2. Complex shapes
Powder metallurgy allows to obtain complex shapes directly from the compacting tooling ,without any machining operation ,like teeth ,splines ,profiles ,frontal geometries etc.

3. High precision
Achievable tolerances in the perpendicular direction of compacting are typically IT 8-9 as sintered,improvable up to IT 5-7 after sizing .Additional machining operations can improve the precision .

4. Self-lubrication
The interconnected porosity of the material can be filled with oils ,obtaining then a self-lubricating bearing :the oil provides constant lubrication between bearing and shaft ,and the system does not need any additional external lubricant .

5. Green technology
The manufacturing process of sintered components is certified as ecological ,because the material waste is very low ,the product is recyclable ,and the energy efficiency is good because the material is not molten.

FAQ
Q1: What is the type of payment?
A: Usually you should prepay 50% of the total amount. The balance should be pay off before shipment.

Q2: How to guarantee the high quality?
A: 100% inspection. We have Carl Zeiss high-precision testing equipment and testing department to make sure every product of size,appearance and pressure test are good.

Q3: How long will you give me the reply?
A: we will contact you in 12 hours as soon as we can.

Q4. How about your delivery time?
A: Generally, it will take 25 to 35 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. and if the item was non standard, we have to consider extra 10-15days for tooling/mould made.

Q5. Can you produce according to the samples or drawings?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6: How about tooling Charge?
A: Tooling charge only charge once when first order, all future orders would not charge again even tooling repair or under maintance.

Q7: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q8: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Shipping Cost: Estimated freight per unit.	To be negotiated

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, as Required
Hardness:	as Required
Gear Position:	as Required

Samples:	US$ 20/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

gearbox

Common Problems with Gearboxes and How to Troubleshoot Them

Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:

Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.

Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.

China factory Powder Metallurgy Gearbox, Iron Transmission Gear Gearbox differential gearbox
editor by CX 2023-09-05

China Standard Truck Spare Parts Gearbox Wly5g40 5gt40b-04A-00 JAC/Jmc/Foton/Forland/Isuzu/DFAC/FAW/HOWO/Sinotruk/Sitrak/Yuejin/Cummins/Sany/Auman/Fast/Weichai/Yuchai/Quanchai differential gearbox

Product Description

Description:	Gearbox
Model:	WLY5G40
Part No.:	5GT40B-04A-00
Specification:	10cd38d17mm
Measurement:	975868CM
Brand:	ZHONGPEI
Warranty:	6 Months
Application:	WangHangZhou
Package:	Carton Box
Delivery:	1-3days

One -station purchasing

Occupy an area of 50, 000 square meters, 20 warehouses with over 700 members…

Supporting with over 100, 000 kinds of spare parts, which make us always offer our customers satisfied service, especially timely deliver and variety kinds of auto parts

1: 25 years’ experience in auto parts.

2: No. 1 auto parts supplier in China Brand vehicles.

3: Auto parts on light, medium and heavy truck, bus, pick up.

4: Supply Engine/Gearbox assy and all Engine/Gearbox/Chassis/Body spare parts.

Chinese brand vehicles’ spare parts available…

JAC SERIES

JAC1571,JAC1571,JAC1030,JAC1035,JAC1040,JAC1045,JAC1048,JAC1061,JAC1063,JAC1083,JAC3045,JAC3048,JAC3072,JAC3090,JAC-SWORD,JAC-GALLOP,ReFine,JAC-BUS(HK/HFC),JAC-forklifts,JAC-PICK…

FOTON/FORLAND/BAW SERIES

BJ1571,BJ6486/88, BJ1571,BJ1571,BJ1036,BJ1039,BJ1043,BJ1046,BJ1049(OLLIN),BJ1069(OLLIN),BJ1089,BJ3042,BJ3043,BJ3052,BJ3062,BJ3072,AUMAN,BAW1030,BAW1040,BAW1044,BAW1048^

JMC/ISUZU SERIES

JMC1571,JMC1030,JMC1032,JMC1040,JMC1042,NHR,NKR,100P,600P,700P^

XIHU (WEST LAKE) DIS.FENG SERIES

EQ1030,EQ1032,EQ1040,EQ1044,EQ1045,EQ1071,EQ1081,EQ3060,EQ3061,EQ3092,DFL-KINLAND,DFA-BUS^

SINOTRUK SERIES

STEYR,STEYR KING,NEW-HUANGHE,HOWO,HOWO-A7,SITRAK-T7H,Golden Prince,HOKA,HAOYUN,HOWO -LIGHT TRUCK,MINE TRUCK,Golden Prince^

FAW SERIES

CA1571,CA1031,CA1041,CA1047,CA1051,CA1061,CA1081,J4,J4Q,J5K,J5M,J5P,J5Q,J6^

YUXIHU (WEST LAKE) DIS. SERIES

NJ1571,NJ1026,NJ1571,NJ1030,NJ1035,NJ1038,NJ1040,NJ1042,NJ1043,NJ1062,NJ1063^

BUS SERIES

KING LONG(XMQ),GOLDEN DRAGON(XML),HIGER(KLQ),YUTONG(ZK),ZHONG TONG(LCK),YOUNG MAN(JNP),HENG TONG(CKZ),SHAOLIN(SLG),XIHU (WEST LAKE) DIS.,SHENLONG(SLK),ANKAI(HFF),FOTON O-V(BJ),HUANGHAI(DD),ZONDA(YCK)^

OTHER SERIES

ZheJiang -F2000, ZheJiang -F3000,SAIC-IVECO XIHU (WEST LAKE) DIS.N,CAMC

GREAT WALL(CC),ZXIHU (WEST LAKE) DIS.(BQ),JINBEI(SY),DADI AUTO(BDD),XINKAI(HXK),TIANMA(KZ),GONOW,HAFEI,CHANA,CHANGHE,XIHU (WEST LAKE) DIS.,CHERY,GEELY,BYD^

Shipping Cost: Estimated freight per unit.	To be negotiated

After-sales Service:	6 Months
Warranty:	6 Months
Type:	Gearbox Parts

Customization:	Available \| Customized Request

gearbox

Can I Use Synthetic Oil in My Gearbox?

Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:

Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.

However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.

China Standard Truck Spare Parts Gearbox Wly5g40 5gt40b-04A-00 JAC/Jmc/Foton/Forland/Isuzu/DFAC/FAW/HOWO/Sinotruk/Sitrak/Yuejin/Cummins/Sany/Auman/Fast/Weichai/Yuchai/Quanchai differential gearbox
editor by CX 2023-08-23