Product Description
| Product Features | Description |
| Product Models | T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25 |
| Maintenance | Clean internally and replace lubricant after initial use of 2 weeks or 100-200 hours. For long-term use, replace lubricant every half to 1 year or every 1000-2000 hours |
| Lubricant | China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees |
| Product Description | The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries |
| Technical Features | The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities |
| Performance Features | The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CHINAMFG and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force |
| Technical Parameters | Speed ratio range: 1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1. Torque range: 11.2 – 5713 Nm. Power range: 0.014 – 335 kW |
·Product Models: T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25.
·Maintenance: The gearbox should be cleaned internally and the lubricant should be replaced after the initial use of 2 weeks or 100-200 hours. For long-term use, the lubricant should be replaced every half to 1 year or every 1000-2000 hours.
·Lubricant: The product uses China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees.
·Product Description: The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries.
·Technical Features: The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities.
·Performance Features: The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CHINAMFG and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force.
RFQ
Q:What information should I tell you to confirm speed reducer?
A: Model/Size, Transmission Ratio, Shaft directions & Order quantity.
Q:What if I don’t know which gear reducer I need?
A:Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q:What should I provide if I want to order NON-STANDERD speed reducers?
A: Drafts, Dimensions, Pictures and samples if possible.
Q:What is the MOQ?
A: It is OK for 1 or small pieces trial order for quality testing.
Q:How long should I wait for the feedback after I send the inquiry?
A: Within 6 hours
Q:What is the payment term?
A:You can pay via T/T(30% in advance+70% before delivery), L/C ,West Union etc
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
Can I Use Synthetic Oil in My Gearbox?
Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:
- Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
- Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
- Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
- Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
- Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
- Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
- Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.
However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.
editor by CX 2023-09-23
China supplier Auto Parts Power Steering Rack Steering Gear Box 56500-D3100 for CZPT Tucson 2015-2019 LHD 4WD gearbox drive shaft
Product Description
Our Advantages:
1.Japanese technology, Chinese factory price
2. Factory price,Let you have enough profit
3. Control Arm In stock,quick delivery
4. Professional Perfomance Auto parts supplier.17 years of experience in auto parts technology,
focus on professionalism worthy of your trust
5.Support product LOGO, packaging, pattern customization
| Part Name | power steering RACK |
| Brand | KINGSTEEL |
| Application | Auto steering system |
| car maker | For CHINAMFG Tucson 2015-2019 LHD 4WD |
| Part Number | 56500-D3100 |
| Placement on Vehicle | Chassis |
| Material | iron |
| Warranty | 1 Year |
| Sample | Accpet |
| Price | Welcome to inquiry the latest price 20-21$ |
| Place of origin | HangZhou |
| Delivery time | 1-7 days for stock items, 30 days for production items |
| MOQ | 6 PCS |
| Packing | KINGSTEEL Brand Packing, Neutral Packing,As Customers’ Request |
| BOX/QTY | 1PCS /CTNS |
| Payment | L/C,T/T,Western Union,MoneyGram,PayPal |
Quality Assurance Factory Price High Quality,Control Arm For Different
kinds of car models,Welcome to contact us for further information,Help you
save time to find the product you need
| After-sales Service: | Support |
|---|---|
| Warranty: | 1 Year |
| Material: | Steel |
| Certification: | ISO/TS16949 |
| Car Make: | Hyundai |
| Position: | Lower |
| Samples: |
US$ 20.36/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2023-09-15
China Best Sales Gearbox 6DCT450 Automatic Transmission Gear Box for CZPT CZPT CZPT gearbox design
Product Description
Gearbox 6DCT450
Gearbox 6DCT450 Automatic Transmission Gear Box for CHINAMFG CHINAMFG Great Wall
The 6DCT250 front-transverse transmission has 6 CHINAMFG gears and 1 reverse gear. The even (2, 4, 6, R) and odd-numbered gears (1, 3, 5) are divided into 2 partial transmissions. The engine and the 2 partial transmissions are connected by means of a dry dual clutch
Product Parameters
| 6DCT250 Transmission | |
| Model: | 6DCT250 |
| Max torque capacity: |
240 – 280 N·m |
| Installation length: | 350-400 mm |
| Gear spread ratio: | max. 7.2 |
| Weight: | 72-82 kg (incl. damper/DMF) |
| Ratio 1st gear: | 15-18.5 |
The engine was installed on:
- for Ford Fiesta
Comments by Customer
Factory View
| Application: | Car |
|---|---|
| Function: | Clutch |
| Installation: | Vertical Type |
| Type: | Cylindrical Gear Box |
| Transport Package: | Neutral |
| Specification: | 75kg |
| Samples: |
US$ 999/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Different Types of Gearboxes and Their Applications
There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:
- Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
- Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
- Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
- Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
- Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
- Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
- Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.
Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.
editor by CX 2023-09-15
China manufacturer Motorcycle Gear Box Gxt200/Caja De Cambios/Pinon Completa gearbox engine
Product Description
1,Durable and high Quality.
2,Nice-looking packing.
3,Prompt delivery.
4,Wide range of parts for more models available.
5,OEM production welcome
6,Most competitive wholesale prices.
7. One stop buying service provided.
Our company is located in HangZhou and specialized in manufacturing and trading of moto parts and accessories.We could supply the parts for the popular Japanese brand,Chinese brands and Indian brand motorcycles.
With an experienced and professional team, we have exported our products to many countries and regions all over the world, especially Latin America,Middle East,East Europe and Africa.Our products enjoy a good reputation among our customers. We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
We could supply parts for more models including Honda,Suzuki,Yamaha,Bajaj,TVS.and Chinese motos Qingqi,Keeway,Benelli,Haojue,Sanyua,Xihu (West Lake) Dis.n etc. For more parts and catalog,Welcome to contact us. Website:
The hot parts available:
| Off road parts | For Qingqi GXT200,GXT250,Honda XL125,XR150,Yamaha DT175,XTZ125 Etc |
| Scooter parts | Gy6 50/125/150 scooter parts,AN125,WH125 scooter parts,Keeway scooter parts |
| 2-stroke parts | JOG50 3KJ,AG100,Dio50,MBK,PGT BUXY,PIAGIO TYPHOON,AX100 |
| Bajaj parts | BM150,BM100,Dscover135,Pulsar200,200NS,Platino etc |
| Tricycle parts | 200cc cargo tricycle,250cc/300cc tricycles,and bajaj 3w4s parts,TVS king |
| Engine parts | Cylinder,piston,head,gear sets,camshaft,gear sets,camshaft,plug,bearings etc |
| Electrical parts | CDI,regulator,stator coil,start motor,start relay |
| Brake parts | Brake pad,brake shoes,brake caliper,disc,brake pumps |
| Body parts | Kick lever,gear levers,footstep,shock absorbers,fuel tank,seat |
| Transmission | Drive chain,sprockets,cam chain,chain lock,wheel hub,and covers |
| Switches | Ignition switches,lock sets,fuel cap,hand switches,fuel cock |
| Supply models | AKT,ITALIKA,UM,YUNBO,ZENELLA,MOTOMEL,MONDIAL,HangZhou,LIFAN ET |
FAQ:
1. Why choose us?
We are professional in the moto parts business in China mianland. We are confident that with our experience,quality,service can give our customers complete satisfaction.
2. MOQ:
It is between 100 or 200pcs or sets,it depends on the parts. For some parts,200pcs is a start,for some big parts,for 50pcs,there is no problem.
3.Mode of Delilivery
it could be by air,by sea (LCL,FCL) or by express (DHL/UPS/TNT/FEDEX).
we can delivery it according to your option.
4. Delivery time:
We could make delivery within 15 or 20 days after your deposit payment. Also it depends on what kind of parts you buy. For some parts,if we have stock,it will be very quick,one week will be ok.
5. Payment:
we accept T/T payment,L/C and Western union. Actually,we use T/T more,namely by 30% deposit,balance could be paid before or after loading.
For more question, please contact us freely,we would be pleased to talk with you.
Website:
| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Type: | Motorcycle Engine Assembly |
| Start: | Gear Sets |
| Cylinder NO.: | 1 Cylinder |
| Stroke: | Four Stroke |
| Customization: |
Available
| Customized Request |
|---|
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2023-09-13
China Professional CZPT Customized Alloy Steel Gear Box House Sell Like Hot Cakes gearbox design
Product Description
Densen Customized Alloy Steel Gear Box House Sell Like Hot Cakes
We have professionals to solve your questions, please contact us directly!
Product Description
|
Description |
Customized oil and gas machinery parts gearbox housing made by CZPT and machining |
|
Type |
Oil and gas machinery parts |
|
Application |
Oil and gas industry |
|
Processing |
Drawing analysis+Pattern design and making +Sand casting or Forging |
|
Material |
Alloy steel ASTM A105-85 API8C
|
| Weight Ranges |
0.1-240ton |
|
Tolernace |
CT10-12 |
|
Design Support |
Pro-E, UG,SolidWorks,AutoCad, PDF |
|
Quality Control |
Material, Dimension,Performance Test,Inside defects |
|
Standard |
ASTM,DIN,JIS,ISO |
Sand casting gearbox housing parts show:
Declaration:
Products shown herein are made to the requirements of specific customers and are illustrative of the types of manufacturing capabilities available within CZPT group of companies.
Our policy is that none of these products will be sold to 3rd parties without written consent of the customers to whom the tooling, design and specifications belong.
Company Information
About our Company Small Casting Water Pump Impeller Open Impeller small impellers bronze impeller
HangZhou New CZPT Casting and Forging Company is the sales company of HangZhou CZPT Group of Companies. Features of New CZPT simply summarized as below:
1. Trusted supplier of steel, iron & non-ferrous components;
2. Extensive documented quality program in place.
3. Castings, forgings, stampings, machining, welding & fabrication services.
4. 9 related factories, over 50 joint-venture sub-contractors.
5. 25+ years of manufacturing experiences, 10+ years of exporting experience
6. 100% of products sold to overseas customers.
7. 50% of customer base is forturne 500 companies.
Densen Group Architecture:
Processing support
Casting Service:
Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify.
New Densen offers multiple investment casting, sand casting, permanent casting, die casting, low pressure casting, ESR casting, lost foam casting, etc. Material can be handled include steel, iron, non-ferrous. Single component weight range is from 0.01Kg to 150 tons separately.
Forging Service:
Forging is a manufacturing process involving the shaping of metal using localized compressive forces. New CZPT offers open die forging, closed die forging and ring forging services. Material can be steel, iron and non-ferrous. Material can be handled include steel, iron, non-ferrous. Single component weight range is from 0.1Kg to 50,000Kgs.
Stamping Service:
Stamping (also known as punching) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape.
New Densen-XBL has more than 60 sets stamping equipments, is the designed supplier for several famous bands automotive companies, has the full ability to offer whole processes from blanking, stamping, welding, to electrostatic spraying for CZPT customers.
Welding & Fabrication Service:
Welding Frabrication is the fabrication process of metal structures by cutting, bending, then assembling the components together through welding
New CZPT offers manual arc welding ,laser welding and robot welding etc. UT, MPT,RT,PT all are available used for inspection, WPS &PQR (Welding Process Specification& Procedure Qualification Records) before production is available under clients’ requirement.
Machining Service:
Machining is any of various processes in which a piece of raw material is cut into a desired final shape and size by a controlled material-removal process.
New Densen-XBL has more than 60 sets precision machines incl. CNC center, boring, milling, lathing, etc., and more than 300 inspection instruments incl. 3 sets CMM with grade μm. Repeated tolerance can be maintained as 0.02mm. Meanwhile awarded by certificates ISO9001-2008; ISO/TS16949. New Densen-XBL specialized in high precise machining for small-middle-big metal components.
3rd Party Inspection:
New Densen worked as 3rd party inspection center besides its sister factories or sub-contractors’ self inspection, Offers process inspection, random inspection and before delivedry inspection services for material, mechanical, inside defects, dimentional, pressure, load, balance, surface treatment, visual inspection and test. Weekly project follow-up report together with pictures and videos, full quality inspection documentation available.
New CZPT also designed as 3rd party inspection representative for several customers when their products made by other suppliers.
Contact Us
| Type: | Clay Dry Sand, Circular Gear |
|---|---|
| Casting Method: | Thermal Gravity Casting |
| Sand Core Type: | Resin Sand Core |
| Application: | Machinery Parts, Agricultural |
| Machining: | CNC Machining |
| Material: | Aluminium & Aluminum Alloy |
| Customization: |
Available
| Customized Request |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2023-09-10
China Best Sales CZPT Petrol Grass Trimmer Gearbox 26/28mm Gear Box for Brush Cutter Parts gearbox design
Product Description
Brush Cutter Gear Case
| Material | Aluminum |
| Diameter | 26mm/28mm |
| Inside Gear | 4T/7T/9T |
| Color | grey, red, green, blue, etc. |
| Delivery time | 30 days |
| Supply ability | 280,000pcs/Carton |
| Place of origin | ZHangZhoug, China |
Lambotec mainly produce the CZPT parts for ST, HUSQ, HNDA, YMAHA, RBIN and ZNOAH BRAND machines.
We can offer the full range of parts for the following models, if you are interested in any of them,please feel free to contact with us:
| ST MODELS |
MS170 / 017 MS180 / 018 MS200T MS230 / 571
MS240 / 571 MS250 / 571 MS260 / 026 MS261 / 261c
MS290 / 571 MS291 / 391 MS340 / 034 MS360 / 036
MS361 MS362 MS380 / 038 MS381
MS390 / 039 MS440 / 044 MS460 / 046 MS640 / 064
MS660 / 066 070
FS120 FS160 FS200 FS220 FS250 FS280 FS450 FS38 FS45 FS55 FS80 FS85 FS90 HS81 HS86 |
| HUSQ MODELS | 137 142 55 61 268 272 288 345 350 359 365 395 372 575 |
| HNDA MODELS | GX31 GX25 GX35 GX110 GX120 GX140 GX160 GX200 GX240 GX270 GX340 GX390 |
| RBIN MODELS | EY15 EY20 EY28 |
| YMAHA MODELS | ET650 ET950 MZ175 MZ300 MZ360 |
| Certification: | CE |
|---|---|
| Power Source: | Gasoline |
| Type: | Brush Cutter Parts |
| Material: | Aluminum |
| Fitment: | All Brush Cutter Models |
| Transport Package: | Color Box or OEM |
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2023-09-07
China high quality Car Spare Parts Auto Part Toy Car Double Friction Gear Box gearbox and motor
Product Description
Toy car accessories Spare parts
| Description | Toy car accessories |
| No. | 650 |
| Specification | 92*22*24mm |
| Moq | 20000 pcs |
You can according to your size of toy car accessories to order,
if we don’t have same as your size,and your quantity is large,we can customize.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Plastic Cement: | Tire |
|---|---|
| Hardware: | Gear Box |
| Type: | Plastic Accessories |
| Customization: |
Available
| Customized Request |
|---|
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2023-09-07
China Hot selling China Supplier Hdm Series De-Clutchable Worm Gear Box Manual Override Worm Gearbox with high quality
Product Description
Description
HDM De-clutchable wormgear offers simple and reliable manual positioning of the valves, dampers and other quarter-turn devices when overriding existing pneumatic, electric or hydraulic quarter-turn actuators. All unit are suitable for both indoor and outdoor installation. The modular design is to provide the most efficient and effective solution to a full range of manual overriding requirements.
Main Product features
To engage manual operation, first pull out the lock handle and then rotate the clutch lever in anti-clockwise direction until engagement takes place. To return to automatic mode, first pull out the lock handle and then rotate the clutch lever in clockwise.
Remark:The bottom center of the HDM-4 is either F10/F14 or F10/F12
| New Manual Override | Countershaft | Valve Connection | Actuator Connection | ||||||||||
| b1 | N | b2 | M | D1 | 4-M1 | D2 | 4-M2 | E | D3 | 4-Φ1 | D4 | 4-Φ2 | |
| HDM-1 | 14 | 22 | 14 | 16 | Φ50 | 4-M6 | Φ70 | 4-M8 | 70*70 | Φ50 | 4-Φ6.5 | Φ70 | 4-Φ8.5 |
| HDM-2 | 17 | 22 | 17 | 18 | Φ70 | 4-M8 | Φ102 | 4-M10 | 95*95 | Φ70 | 4-Φ8.5 | Φ102 | 4-Φ10.5 |
| HDM-3 | 22 | 28 | 22 | 22 | Φ102 | 4-M10 | Φ125 | 4-M12 | 114*114 | Φ102 | 4-Φ10.5 | Φ125 | 4-Φ12.5 |
| HDM-4 | 27 | 32 | 27 | 30 | Φ102 | 4-M10 | Φ125 | 4-M12 | 129*129 | Φ125 | 4-Φ12.5 | Φ140 | 4-Φ16.5 |
| HDM-5 | 36 | 45 | 36 | 38 | Φ140 | 4-M16 | / | / | 156*156 | Φ140 | 4-Φ17 | Φ165 | 4-Φ21 |
| HDM-6 | 46 | 50 | 46 | 48 | Φ165 | 4-M20 | / | / | 160*160 | Φ165 | 4-Φ22 | / | / |
| New Manual Override | A | B | ΦC | F | T | Y | H | S | K | Ratio | Rated Input | Rated Onput |
| HDM-1 | 90 | 55 | Φ88 | 115 | 44 | 145 | 120 | 53 | 10 | 26:1 | Nm | 250Nm |
| HDM-2 | 125 | 64 | Φ110 | 135 | 62.5 | 178 | 133 | 56.5 | 13 | 28:1 | Nm | 450Nm |
| HDM-3 | 140 | 71 | Φ129 | 166 | 70 | 212 | 180 | 68.7 | 12.5 | 38:1 | Nm | 700Nm |
| HDM-4 | 188.5 | 93 | Φ174 | 202 | 94 | 280 | 195 | 84 | 15 | 54:1 | Nm | 1200Nm |
| HDM-5 | 222 | 110 | Φ205 | 245 | 110 | 315 | 225 | 92 | 15 | 80:1 | Nm | 2000Nm |
| HDM-6 | 252 | 120 | Φ275 | 280 | 125 | 320 | 252 | 102 | 15 | 78:1 | Nm | 3000Nm |
1. Question:What is your main products?
Answer:Our main products are Pneumatic Actuators, Electric Actuators, Actuated Valves And Valve actuators Accessories..
2. Question:Are you a trader or manufacturer ?
Answer: We are the pneumatic actuators and electric actuators manufacturer , we have ability to do the customization products with experienced team, And we have own factory and production line.
3. Question:How do your make the quality guarantee for actuators?
Answer:We have our own quality control system for incoming and outgoing of the materials, every product will be under controlled and tested before delivery to our customer , and we also provide 18 months guarantee ,beside we provide technical supporting .
4. Question:When can I receive the Price of valve actuators ?
Answer:We will give the Quotation Within 24 hours after we get your inquiry .Or Your can call or message us if it’s quite urgently.
5. Question:How to order our pneumatic actuators and electric actuators ?
Answer:Please send us your inquiry by Email, , etc. we need to know the following informations before giving the formal Quotation.
1) Product information in details, Quantity, Other requirements
2) Delivery time required
6. Question:How can I get a sample to check your quality?
Answer:Contact with our sales expert to arrange the sample delivery. Please send us the details of the sample before placing the order.
7. Question:Shall we pay the sample cost and transportation cost ?
Answer:We will provide the sample by free of charge. Your will bear the freight cost.
8. Question:How long to prepare the sample ?
Answer:Most of our products are under regular production and some of them we keep in stocks.
9. Question:How to delivery the sample to our place?
Answer:Your can provide your forwarders contacts if any, or we will arrange it for you.
10. Question:What about the delivery date if we place the formal order ?
Answer:Usually it takes 15~20days on the production .We know that on-time delivery is very crucial to our customers to meet dead-lines.
We monitor and expedite our supply chain to ensure that we delivery our products to our customers on-time all the time.
| Installation: | Manual |
|---|---|
| Type: | Worm Gear Box |
| Worm Material: | Qt400 |
| Shaft Material: | 45#Steel |
| Transport Package: | Foam and Carton Box |
| Trademark: | Hearken |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can I Use Synthetic Oil in My Gearbox?
Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:
- Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
- Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
- Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
- Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
- Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
- Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
- Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.
However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.
editor by CX 2023-09-07
China high quality 42mm Metal Cutted Gear Box High Precious Low Noise Planetary Gearbox manufacturer
Product Description
Product overview:
Planetary gearheads feature extremely high power transmission with a very short design. The modular design and the scaled stages provide the basis for a customer-specific solution. Metal components make use in a wide range of applications possible.At the same time they have a very compact form, low weight, and excellent efficiency. Self-centering planet gears ensure a symmetrical force distribution. The ring gear also forms the housing of the gearbox. The gearbox output shaft is supported in 2 ball bearings so that it can withstand high axial and radial loads. The gearboxes are customized, e.g. for use in especially low ambient temperatures, or as high-power gearboxes with reinforced output shafts, or with special lubricants for very long service life.
Typical applications:
- ATM in bank,Robot,Door-lock,Auto shutter, USB fan,Slot machine,Money detector, Coin refund devices
- Currency count machine, Towel dispensers, Automatic doors,Peritoneal machine
- Automatic TV rack, Office equipemt ,Household appliances,Automatic, medical screwdriver, robotic arms
- Lab stirrer, Cosmetology instrument, Medical devices, Hairdressing equipment,Cameras,Health-care articles
Miscellanea:
- Please contact us to get detailed specifications and drawings for the geared motor you’re looking for.
- We are able to design and produce the geared motor you specified.(OEM & ODM).
- Please visit us at silent to get more information.
| Application: | Motor |
|---|---|
| Function: | Change Drive Torque |
| Layout: | Three-Ring |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2023-09-04
China supplier Extruder Gear Box gearbox definition
Product Description
Polytek co-rotating twin-screw extruders are designed for maximum reliability, ease-of-use and flexibility. We offer turn-key solution for all types of material compounding applications.
we are proud to introduce our PTH series extruder which equiped with high torque and high speed gear box, desinged with specific torque of
12Nm/cm3 to achieve high screw filling rate, which results in a decrease of melt temperature, thus improving compound quality.
what is twin screw extruder
Co-rotating twin-screw extruder : Due to the co-rotating twin-screw has the opposite speed at the meshing point, 1 screw pulls the material into the meshing gap, and the other screw pushes the material out of the gap, resulting in material from 1 screw turns to the other screw and advances in a “∞” shape. Since the gap of the meshing zone is small, the speed of the meshing screw and the groove are opposite in direction, so that the cutting speed is high, and the self-cleaning effect is good, that is, any accumulated material adhering to the screw can be scraped off, thereby The residence time of the material is very short, so the twin screw extruder is mainly used for compounding and pelletizing .
Polytek also have 2 stage extruder for PVC compound and high filler masterbatch extrusion.
Technical Data of PTH Extruder
| Model | Torque/Shaft(Nm) | Screw Diameter(mm) | Max.Screw Speed(RPM) | Motor Power(Kw) | Capacity(Kg) |
| PTH-20 | 40 | 22 | 600 | 5.5 | 15 |
| PTH-25 | 110 | 25 | 900 | 22 | 90 |
| PTH-35 | 320 | 36 | 900 | 75 | 280 |
| PTH-50 | 890 | 51 | 900 | 200 | 800 |
| PTH-65 | 1690 | 62 | 900 | 355 | 1400 |
| PTH-75 | 2590 | 71 | 900 | 550 | 2200 |
| PTH-96 | 5690 | 94 | 600 | 710 | 4000 |
| PTH-135 | 7160 | 132 | 400 | 600 | 3500 |
| PTH-165 | 14300 | 165 | 400 | 1200 | 5000 |
Construction :
The Applications of Co-rotating Twin Screw Extruder
1.Glass fiber reinforced, fuel barrier palletizing (For example PA6, PA66, PET, PBT, PP, and PC reinforced flame retardant)
2.Highly filled material granulation (For example PE, PP filled with 75%CaCo)
3.Granulation of heat-sensitive materials (For example PVC, XLPE cable material)
4.Intense color masterbatch (For example filled with 50% color powder)
5.Antistatic masterbatches, alloys, coloring, low-fill co-mingling granulation
6.Cable material granulation (For example sheathing material and insulation material)
7.XLPE pipe material granulation (For example masterbatches for hot water crosslinking)
8.Thermoset plastic compounding and extrusion (For example phenolic resin, epoxy resin, and powder coating)
9.Hot melt adhesive, PU reactive extrusion palletizing (For example EVA hot melt adhesive and polyurethane)
10.K resin, SBS de-volatile granulation
Spare parts and service, we are not only selling machine, but also our knowledge and service
Owe to rich theoretical knowledge and experience in compounding fifield, we can offer best solution to meet customer’s requirement, not only for local extruders. We can also provide standard parts of Coperion, Berstoff, JSW, Toshibar, Steer etc.
About Polytek
POLYTEK Intelligent Equipement Co., Ltd. is a committed in plastic extrusion and recycling technology R & D, to provide for customers compounding/plastic pipe/profile/sheet/board extrusion & waste plastic washing recycling machines, which will meet requirement of ISO 9001 and CE. With many patent technologies, we can provide customized solution for all kinds requirement, which will be stable, best performance, and competitive price .We have 3000m2 plant and over 30 employs, including a strong team of technical design and after sale service, which will insure the quick action to customer’s requirement.
Certification For PTH Extruders
More Equipment for various polymer compound
| Air cooling conveyor Belt | twin screw extruder | Two stage extruder |
Purchasing from CZPT is only the beginning of our relationship. We are committed to the success of our customers
and we support you and your equipment throughout the life of your investment. We provide expertise with preventative
maintenance plans, health and wellness checks, and training services so that you can focus on what you do best: sell your product.
| After-sales Service: | 24 Hours on Call |
|---|---|
| Warranty: | 12 Months |
| Type: | Twin Screw Extruder for Compouding |
| Plastic Processed: | PP PE Pet PC ABS TPR TPE TPU TPV PVC |
| Product Type: | Granulating Extruder |
| Feeding Mode: | Multiple Feed |
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2023-08-30