Product Description
Spline Key Output PTO SDQWL31-46LGQ1 For WLY5TS40 Gearbox Power Take-off ( WLY Transmissions Power Take off)
(DFAC CZPT CZPT JAC CZPT Truck WLY Fast Transmissions Power Take off)
WanLiYang series power take off (WLY PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WL24/37 |
1.176 |
250 |
10H30 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WL24/38 |
1.077 |
3-01 connector. |
| Tell: tictrucks HangZhou City ZheJiang Province China | ||||
| Gearbox Factory | Gearbox Transmission Model tictrucks |
SZ OBM Model | Brief data PTO | |
| PTO ODM MODEL | Truck brand | |||
| HaChi Gearbox | C171757121-8C CA6-75AB19 CATS6-62 CA6T-123 6T120 JS6-550 TS6-53(Direct) | -8C | SDQ12/68 | FAW |
| HangZhou | C1 | FAW | ||
| HaChi Gearbox | TZ17-449 CA6T-138(FAW Eaton) | 6-74 | SDQ15/75 | FAW |
| Xihu (West Lake) Dis.feng | 17V20 17V70–Q17421(HangZhou) JC5-20T23(HangZhou) 17G0A8-LB27 17G0A88-QB80 17G1A8-20 17G0A5-EG05-B | SDQ23/30 | Furika | |
| LG | LG520Q3 LG525Q Mengwo170571-Q17571 MW525CL 17G0AB02 WLY520 | 525 | SDQ23/32 | FOTON Furika |
| SDQ33/32 | ||||
| YY | SYC07 170571-C64-E31121 TC5-30HKA20(Tangchi) TC5-30HFE9(Tangchi) YC5-30V06 LG535QHZJB1 | 1061 | SDQ23/37 | FOTON Furika |
| WLY | WLY5TS32-73–LD4-90651 17KW1-N9-N9-Q17421 | |||
| LC JAC | 2830.5 | SDQ42/27 | IVCO NAVECO | |
| LC JAC | LC6T35 | SDQ50/35 | JAC | |
| LC JAC | LC6T46(A2Q25) LC6T450MT(AZQ28) WLYZ6S46( ) | 646 | SDQ50/45 | FOTON AUMARK |
| WLY | WLY6S46 | 646 | SDQ50/69 | |
| LC JAC | LC6T540 15CO7571 | SDQ50/63 | JAC | |
| LC JAC | LC5T97 LC5T30( 6teeth) | 5T97 | SDQ50/71 | |
| LC JAC | LC5T400M1(A2Q08) | 5T35 | SDQ50/74 | FOTON Oling |
| NISSAN Z F5S400V | SDQ51/44 | NISSAN | ||
| ZheJiang | MSB-5M(A2Q05) LC5T88(6 teeth) | IUZU QINGLING | SDQ51/62 | IUZU QINGLING |
| ZheJiang | MSB-5M(A2Q05) LC5T88(6 teeth) | SUZU QINGLING | SDQ51/63 | SUZU QINGLING |
| DN3-70030-E0 6MT1420 | DN3 | SDQ51/65 | SUZU QINGLING | |
| ISZU QINGLING | MSB-5S/5M/5SM 5MT1280JD JC526T3D | 1571 5T88 | SDQ51/74 | JMC small |
| WLY | WLY5TS32C-58-32 | Xihu (West Lake) Dis.feng | ||
| WLY5TS32-31-32 | Xihu (West Lake) Dis.feng | |||
| HangZhou | JC528T8 | 1571 5T88 | SDQ51/67 | JMC |
| ZheJiang | ISZU MRB6P( EURO3) | SDQ52/74 | ISZU QINGLING | |
| ZheJiang | MRB6Q MLD6Q | 5T ISZU | SDQ52/77 | ISZU QINGLING |
| FAST | 8JS85E 17JK-G18569(JiangKai) | 85E | QD40A | FAST, Xihu (West Lake) Dis.feng |
| RT-11609A RT-11509C | SDQ211/70-A | Xihu (West Lake) Dis.feng, FAW,Xihu (West Lake) Dis.n IVCO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN Xihu (West Lake) Dis. Runze Special Vehicle |
||
| 17G0A9-22 9JS135T-B | SDQ211/70-1 | |||
| 9JS119T-B(170571-K14E3) | SDQ211/70-3 | |||
| 9JS119TA | SDQ211/70-4 | |||
| RTO-11609B RT-11509F | SDQ211/70-5 | |||
| 12JS160TA | SDQ212/70-1 | Xihu (West Lake) Dis.feng, Xihu (West Lake) Dis.n IVCO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN | ||
| 12JD160TA 12JD180T | SDQ212/70-2 | |||
| A5J38T | QC20A | FOTON | ||
| NAVECO | 17H30 | tictrucks | IVEVO NAVECO | |
Power take-off products
Model list of power take-off
FAW Xihu (West Lake) Dis. power take off (FAW PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-YQ12/68 |
1.24 |
250 |
CA6T-123/TS6-53 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-YQ12/72 |
1.199 |
250 |
CA6T-123/TS6-53 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-YQ13/70 |
1.08 |
300 |
CATS6-75A/1700940-680 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-YQ15/75 |
1.006 |
350 |
CATS6-75(74), TZ1700940H4G,CA6T-138 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-YQ15/52 |
1.179 |
400 |
CA6T138 |
Internal spline / flange |
Pneumatic (dynamic clutch) |
Xihu (West Lake) Dis.feng series power take off (DF PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-DF21/33 |
1.044 |
250 |
17C-00030,17G0A4-08, |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-DF22/47 |
1.2 |
600 |
Dt0690 overdrive |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-DF22/47-A |
1.03 |
600 |
Dt0690 overdrive |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-DF24/42 |
1.2 |
600 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-DF24/42-B |
1.03 |
450 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-DF24/45 |
1.2 |
600 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-DF24/45-B |
1.03 |
450 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-DF24/65 |
1.06 |
400 |
DF6S-750 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-DF24/64 |
1.06 |
400 |
DF6S750/DF6S650 |
Internal spline / flange |
Pneumatics |
|
10 |
SDQ-DF24/69 |
1.211 |
350 |
17K1/17KT6K-00030, 17K17-00030/17G1A7-15, 17K23-00030/17G0A7-15 |
Internal spline / flange |
Pneumatics |
|
11 |
SDQ-DF25/63 |
1.23 |
350 |
17G1A7-41/17F40(44/62) /17g0a7-21 (41) / jiangft 650H |
Internal spline / flange |
Pneumatics |
|
12 |
SDQ-DF26/31 |
1.45 |
350 |
DC6J70T/17G0A3-08(09/15/ 25/96)/Zqc6t-75 / 750 |
Internal spline / flange |
Pneumatics |
|
13 |
SDQ-DF27/21 |
1.845 |
350 |
DC85JTZ/17G0Z56-571/17G 0A3-33(35/36)/17G571-N9 002/14G0A3-32(34) /DC6J85TZ |
Internal spline / flange |
Pneumatics |
|
14 |
SDQ-DF27/53 |
1.35 |
350 |
17G0A9-Z67D/DC7J100TB/1 7G0A9-45(-24-00030) |
Internal spline / flange |
Pneumatics |
|
15 |
SDQ-DF27/55 |
1.216 |
300 |
17g0a3-32 (33 / 34 / 35 / 36) straight Connecting gear / dc6j85tz (direct gear) |
Internal spline / flange |
Pneumatics |
|
16 |
SDQ-DF27/65 |
1.07 |
350 |
DC7J100TC,17G0A9-Z66D |
Internal spline / flange |
Pneumatics |
|
17 |
SDQ-DF27/66 |
1.26 |
350 |
Dc6j85tz (overdrive) /17G0A3-54/170571-A9000 |
Internal spline / flange |
Pneumatics |
|
18 |
SDQ-DF28/55 |
1.3 |
400 |
17GOA3-38/17N29-00030 |
Internal spline / flange |
Pneumatics |
|
19 |
SDQ-DF28/65 |
1.55 |
350 |
Dc7j120tb (overdrive) /01-00030 |
Internal spline / flange |
Pneumatics |
|
20 |
SDQ-DF28/72 |
1.84 |
350 |
Dc7j120tc (direct gear) /01-00030 |
Internal spline / flange |
Pneumatics |
Jac Xingrui series power take off (JAC)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-XR50/35 |
1 |
300 |
LC6T55 WLY6TS55 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-XR50/45 |
1.1 |
280 |
LC6T46/LC6T450 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-XR50/60 |
1.1435 |
300 |
LC6T540 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-XR50/63 |
1.11 |
300 |
LC6T540/15CO7571 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-XR50/65 |
1.6433 |
250 |
ML642A-A9 |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-XR50/67 |
1.1541 |
250 |
ML532A |
Internal spline / flange |
Pneumatic / manual |
|
7 |
SDQ-XR50/69 |
1.1 |
280 |
LC6T46/LC6T450 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-XR50/71 |
1.17 |
200 |
LC5T97/LC5T30 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-XR50/74 |
1.03 |
200 |
LC5T35/LC5T40 |
Internal spline / flange |
Pneumatics |
|
10 |
SDQ-XR23/55 |
1.12 |
300 |
LC6T450M1 |
Internal spline / flange |
Pneumatic / manual |
|
11 |
SDQ-XR37/77 |
1.55 |
200 |
ML532C |
Internal spline / flange |
Pneumatic / manual |
Qingling Iuzu series power take off (Iszu PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WS51/62 |
1.3 |
150 |
Msb-5m / starray lc5t88 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WS38/63 |
1 |
150 |
Msb-5m / starray lc5t88 |
Internal spline / flange |
Pneumatic / manual |
|
3 |
SDQ-WS32/64 |
1.095 |
300 |
MYY-6S |
Internal spline / flange |
Pneumatic / manual |
|
4 |
SDQ-WS35/74 |
1.63 |
180 |
MSB-5M/MSB-5S/MSB-5SM/LC5T88
LC5T25/LC5T255M3/LC5T28 |
Internal spline / flange |
Pneumatic / manual vacuum |
|
5 |
SDQ-WS52/77 |
1.18 |
250 |
MLD-6Q/MLD6A |
Internal spline / flange |
Pneumatics |
JMC series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-GT32/65 |
1.26 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
2 |
SDQ-GT51/67 |
1.2 |
200 |
JC5T28/5T26.5/MTI280JD |
Internal spline / flange |
Pneumatic / manual |
|
3 |
SDQ-GT32/65-A |
1.315 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
4 |
SDQ-GT32/65-B |
1.09 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
5 |
SDQ-GT32/65-C |
1.26 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
Z F series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-Z F51/38 |
1.077 |
300 |
Z F6S500/Z F6S600/Z F6S558 Z F6S508/Z F6S458 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-Z F51/44 |
1 |
250 |
Z F5S400 |
Internal spline / flange |
Manual |
|
3 |
SDQ-Z F48/39 |
1.063 |
250 |
Z F5S408/Z F5S328 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-Z F211/65 |
0.772 |
650 |
TraXon12 |
Internal spline / flange |
Pneumatics |
Fast PTO power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-FS212/70 |
0.94 |
600 |
12JSD160TA |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-FS212/70-A |
0.78 |
600 |
12JSD160TA |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-FS19/31 (QD40A) |
1.09 |
400 |
8JS75 |
Internal spline |
Pneumatics |
|
4 |
SDQ-FS24/37 ( QCZ70A) |
0.93 |
600 |
6J80T |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-FS211/60 |
1.1 |
350 |
FAST ETON |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-FS211/70 |
0.94 |
600 |
Fuller / fast / rt-11509c 8JS100S/17G0A9-22 |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-FS211/70-A |
0.78 |
600 |
Fuller / fast / rt-11509c 8JS100S/17G0A9-22 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-FS34/29 |
400 |
8JS75 |
Internal spline / flange |
Pneumatics |
WanLiYang series power take off (WLY PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WL24/37 |
1.176 |
250 |
10H30 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WL24/38 |
1.077 |
300 |
6G55 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-WL24/40 |
1.333 |
300 |
6G40A |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-WL31/39 |
1.1 |
300 |
6G40A |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-WL24/43 |
1.087 |
300 |
5G40 |
Internal spline / flange |
Pneumatic / manual / vacuum |
|
6 |
SDQ-WL24/44 |
1.043 |
300 |
6G40B |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-WL24/59 |
1.094 |
300 |
6G120/6G70 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-WL24/60 |
1.3 |
300 |
6TS40 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-WL24/63 |
1.39 |
180 |
5TS32 |
Internal spline / flange |
Pneumatic / manual |
|
10 |
SDQ-WL 24/63-B |
1.39 |
180 |
5G32A |
Internal spline / flange |
Pneumatic / manual |
|
11 |
SDQ-WL 24/66 |
1.359 |
180 |
5TS32-C |
Internal spline / flange |
Pneumatic / manual |
|
12 |
SDQ-WL 24/66-B |
1.146 |
180 |
5G32B/5G32C |
Internal spline / flange |
Pneumatic / manual |
|
13 |
SDQ-WL 24/67 SDQ-WL 25/67 |
1.147 |
300 |
6T120/6S46/6S51 |
Internal spline / flange |
Pneumatics |
|
14 |
SDQ-WL 24/70 |
1.15 |
200 |
6S46B (2015-4-25) |
Internal spline / flange |
Pneumatic / manual |
|
15 |
SDQ-WL 24/71 SDQ-WL 25/71 |
1.11 |
300 |
6S51B/6S46B |
Internal spline / flange |
Pneumatic / manual |
|
16 |
SDQ-WL 24/72 |
1.133 |
300 |
6TS55E/6TS60 |
Internal spline / flange |
Pneumatic / manual |
|
17 |
SDQ-WL23/63 |
1.35 |
350 |
10H46 |
Internal spline / flange |
Pneumatics |
|
18 |
SDQ-WL23/71 |
1.15 |
400 |
7TS60 |
Internal spline / flange |
Pneumatics |
|
19 |
SDQ-WL24/75 |
1 |
400 |
7TS60B |
Internal spline / flange |
Pneumatics |
|
20 |
SDQ-WL25/70 |
1.244 |
400 |
7TS60C |
Internal flange / spline |
Pneumatics |
|
21 |
SDQ-WL24/73 |
1.07 |
400 |
7TS60D |
Internal spline / flange |
Pneumatics |
|
22 |
SDQ-WL25/33 |
1.228 |
350 |
10h46 (right) |
Internal spline / flange |
Pneumatics |
|
23 |
SDQ-WL27/70 |
1.08 |
150 |
5TS40 |
Internal spline / flange |
Pneumatics |
|
24 |
SDQ-WL31/46 |
1.2 |
180 |
5TS40 |
Internal spline / flange |
Pneumatics |
|
25 |
SDQ-WL211/100 |
1 |
1000 |
9G90 |
Internal spline / flange |
Pneumatics |
SINOTRUCK CZPT PTO power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-ZD27/61 |
1.1 |
600 |
DC7J120T |
Flange flange |
Pneumatic (dynamic clutch) |
|
2 |
HW50 |
0.739 |
500 |
HW14710/HW18710 HW15710/HW19710 |
Internal flange / spline |
Pneumatics |
|
3 |
HW70 |
0.793 |
700 |
HW18709/HW18710 |
Internal spline / flange |
|
|
4 |
HW80Q-F301 |
800 |
HW9571C1 |
Flange flange |
Pneumatics |
|
|
5 |
HW140Q-F301 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
6 |
HW140Q-F302 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
7 |
HW140Q-F303 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
8 |
HW140Q-F305 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
9 |
HW60Q-F300 |
0.686 |
600 |
HW12706 |
Flange flange |
Pneumatics |
Other series of power take-off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-HL211/65 |
0.772 |
650 |
Soda gearbox 12sob1500 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-HL211/100 |
1 |
1000 |
Soda gearbox 12sob1500 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-NQ42/26 |
1.15 |
150 |
NAC 2830.5 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-NQ42/27 |
1.15 |
150 |
NAC 2830.5 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-SQ42/77 |
1.13 |
300 |
SAIC sc50m6d |
Internal spline / flange |
Pneumatics |
New energy Electric Power Truck series power take off PTO
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-LK31/38 |
1.043 |
300 |
HangZhou green control 6s100 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-LK24/36 |
1.136 |
300 |
HangZhou green control j6s95 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-LK20/56 |
1.148 |
300 |
HangZhou green control j2s130 |
Internal spline / flange |
Pneumatics |
Export series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
Pto1000 series |
0.6- 1.88 |
300 |
EATON FS 3005/4005 EATON 6305 |
Internal flange / spline |
Pneumatics |
|
2 |
Pto2000 series |
0.6- 1.88 |
350 |
Eaton fuller CZPT rt-11109a / rt-6609a rt-7608a Allison Ellison M-5600/M-6600/S-5600 S-6600 |
Internal spline / flange |
Pneumatics |
|
3 |
3131(BZ) |
0.84-2.9 4 |
450 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
4 |
3252(BZ) |
0.81-1.8 5 |
300 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
5 |
3151(BZ) |
0.84-2 |
540 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Constant mesh |
|
6 |
3300 |
0.74-1 |
390 |
Allison Ellison MD-1000/MD-2000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
7 |
PTO852 |
1.13 |
650 |
Allison |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
8 |
103K_03(BZ) |
0.77-0.55 |
650 |
S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |
|
9 |
1571K_03 (BZ) |
0.76 |
420 |
Z F S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |
ZheJiang Xihu (West Lake) Dis. Runze Special Vehicle
Certifications
Packaging & Shipping
FAQ
1.Are you trading company or manufacturer ?
We are Group Corporation manufacturer ,have Group Factories Contractor.
2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.
3. What’s the delivery time and can you lower the price?
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
4.Can you supply some quick-wear parts?
Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
6.Do you have any used products for sale?
We have products in stock for choices,the prices are favorable,we’ll show you our stock products if you need.
7.What’s the payment terms?
TT 30% as deposit, balance before shipment by TT or at sight.
8. How to guarantee customers get the goods smoothly after they payment?
Don’t worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don’t delivery products, the deposit will be returned to you.
9.How can you ensure the quality of the products?
Don’t worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.
parking of vehicles.
HWP type Power Take-Off
| No | PTO Model | Ratio | Torque | Transmission | Output Mode | Control | Position |
| 1 | HWP-X23/55CHQ | 1.1206 | 300N.M | LC6T450M1 | Spline | Pneumatic | Side |
| 2 | HWP-X23/55TQ | 1.1206 | 300N.M | LC6T450M1 | Flange | Pneumatic | Side |
| 3 | HWP-X30/71CHQ | 1.5517 | 250N.M | LC5T30 | Spline | Pneumatic | Side |
| 4 | HWP-X30/71TQ | 1.5517 | 260N.M | LC5T30 | Flange | Pneumatic | Side |
| 5 | HWP-X31/63CHQ | 1.1099 | 300N.M | LC6T540 | Spline | Pneumatic | Side |
| 6 | HWP-X31/63TQ | 1.1099 | 300N.M | LC6T540 | Flange | Pneumatic | Side |
| 7 | HWP-X31/74CHQ | 1.5621 | 250N.M | LC5T40 | Spline | Pneumatic | Side |
| 8 | HWP-X31/74TQ | 1.5621 | 250N.M | LC5T40 | Flange | Pneumatic | Side |
| 9 | HWP-I35/62CHS | 1.2971 | 200N.M | MSB-5M | Spline | Manual | Side |
| 10 | HWP-I35/62TS | 1.2971 | 200N.M | MSB-5M | Flange | Manual | Side |
| 11 | HWP-X35/65CHQ | 1.6433 | 250N.M | ML642A | Spline | Pneumatic | Side |
| 12 | HWP-X35/65TQ | 1.6433 | 250N.M | ML642A | Flange | Pneumatic | Side |
| 13 | HWP-X35/65CHQ-A | 1.096 | 250N.M | ML642A | Spline | Pneumatic | Side |
| 14 | HWP-X35/65TQ-A | 1.096 | 250N.M | ML642A | Flange | Pneumatic | Side |
| 15 |
HWP-I35/74CHQ |
1.8 |
250N.M |
MSB-5M |
Spline |
Pneumatic |
Side |
| 1.536 | LC5T28 | ||||||
| 1.82 | LC5T88 | ||||||
| 16 |
HWP-I35/74TQ |
1.8 |
250N.M |
MSB-5M |
Flange |
Pneumatic |
Side |
| 1.536 | LC5T88 | ||||||
| 1.82 | LC5T28 | ||||||
| 17 |
HWP-I35/74CHS |
1.8 |
250N.M |
MSB-5M |
Spline |
Manual |
Side |
| 1.536 | LC5T28 | ||||||
| 1.82 | LC5T88 | ||||||
| 18 |
HWP-I35/74TS |
1.8 | MSB-5M |
Flange |
Manual |
Side |
|
| 1.536 | LC5T28 | ||||||
| 1.82 | LC5T88 | ||||||
| Note |
The above listed are the models and special specifications of common power take-off assemblies, or if you need to customize, please call for details. |
||||||
| Model Of Power Takeoff | Handling Out Method | Operation Mode | Speed Ratio | Rated Torque | Suitable Transmission Model |
| 01 WanLiYang series | |||||
| WLY525 | Internal spline | Manual, pneumatic | 1.56 | 200 | WLY525 CA525 |
| WLY525 | Protrusion connection | Manual, pneumatic | 1.56 | 200 | WLY525 CA525 |
| WLY5T32 | Internal spline | Manual, pneumatic | 1.46 | 150 | WLY5T26 5T32 |
| WLY5T32 | Protrusion connection | Manual, pneumatic | 1.46 | 150 | WLY5T26 5T32 |
| WLY5GS32 | Internal spline | Pneumatic | 1.5 | 150 | WLY5GS32 |
| WLY5GS32 | Protrusion connection | Pneumatic | 1.5 | 150 | WLY5GS32 |
| WLY6T46 | Internal spline | Pneumatic | 1.73 | 250 | WLY6T46 |
| WLY6T46 | Protrusion connection | Pneumatic | 1.73 | 250 | WLY6T46 |
| WLY6T40 | Internal spline | Pneumatic | 1.65 | 250 | WLY6T40 |
| WLY6T40 | Protrusion connection | Pneumatic | 1.65 | 250 | WLY6T40 |
| WLY5S100 | Internal spline | Pneumatic | 1.65 | 200 | WLY5S100 |
| WLY5S100 | Protrusion connection | Pneumatic | 1.65 | 200 | WLY5S100 |
| WLY540 | Internal spline | Pneumatic | 1.32 | 300 | WLY540 |
| WLY540 | Protrusion connection | Pneumatic | 1.32 | 300 | WLY540 |
| WLY526 | Internal spline | Pneumatic | 1.43 | 200 | WLY526 |
| WLY526 | Protrusion connection | Pneumatic | 1.56 | 200 | WLY5T26 |
| WLY530 | Internal spline | Pneumatic | 1.63 | 200 | WLY5-30 |
| WLY530 | Protrusion connection | Pneumatic | 1.63 | 200 | WLY5-30 |
| WLY535 | Internal spline | Pneumatic | 1.42 | 200 | WLY5-35 |
| WLY535 | Protrusion connection | Pneumatic | 1.42 | 200 | WLY5-35 |
| WLY5T97 | Internal spline | Pneumatic | 1.46 | 150 | WLYT92 |
| WLY5T97 | Protrusion connection | Pneumatic | 1.46 | 150 | WLYT92 |
| WLY6T100 | Internal spline | Pneumatic | 1.68 | 250 | WLY6T100-8 |
| WLY6T100 | Protrusion connection | Pneumatic | 1.68 | 250 | WLY6T100-8 |
| WLY653 | Internal spline | Pneumatic | 1.68 | 250 | WLY653 |
| WLY653 | Protrusion connection | Pneumatic | 1.68 | 250 | WLY653 |
| WLY650 | Internal spline | Pneumatic | 1.57 | 300 | WLY650 |
| WLY650 | Protrusion connection | Pneumatic | 1.57 | 300 | WLY650 |
| WLY8S85E | Internal spline | Pneumatic | 1.37 | 300 | WLY8S85 |
| WLY8S85E | Protrusion connection | Pneumatic | 1.37 | 300 | WLY8S85 |
| WLY5T88 | Internal spline | Pneumatic | 1.56 | 250 | WLY5T26 |
| WLY5T88 | Protrusion connection | Pneumatic, manual | 1.56 | 150 | WLY5T26 |
| 02 monvo series | |||||
| MW515JB | End key | Chang He | 1.93 | 120 | MW515 MW517 |
| MW515JB-H | spline | Chang He | 1.93 | 120 | MW515 MW517 |
| MW515EQF | End key | Manual | 1.93 | 120 | MW515 MW517 |
| MW515EQF | Protrusion connection | Manual | 1.93 | 120 | MW515 MW517 |
| MW520GAEC | End key | Chang He | 1.86 | 120 | MW520GA |
| MW520GE | End key | Chang He | 1.86 | 120 | MW520GE |
| MW520GAHB4-4 | End key | Chang He | 1.86 | 120 | MW520GAHB |
| MW520F-2 | Single bond | Manual | 1.72 | 180 | MW520 |
| MW520F1-3 | Internal spline | Manual, pneumatic | 1.72 | 180 | MW520 |
| MW520F2 | Protrusion connection | Manual, pneumatic | 1.72 | 180 | MW520 |
| MR70 | End key | Manual | 1.79 | 150 | MR70 |
| MR70 | Protrusion connection | Manual | 1.79 | 150 | MR70 |
| MT78Q | Internal spline | Manual, pneumatic | 1.67 | 200 | MT78Q |
| MT78Q | Protrusion connection | Manual, pneumatic | 1.67 | 200 | MT78Q |
| MR78 | Internal spline | Manual | 1.83 | 200 | MR78 |
| MR78 | Protrusion connection | Manual | 1.83 | 200 | MR78 |
| MT85Q-2 | Internal spline | Manual, pneumatic | 1.62 | 250 | MT85 |
| MT85Q-2 | Protrusion connection | Manual, pneumatic | 1.62 | 250 | MT85 |
| MT85EC3 | Internal spline | Manual, pneumatic | 1.62 | 250 | MT85 |
| MT85EC3 | Protrusion connection | Manual, pneumatic | 1.62 | 250 | MT85 |
| MR85Q | Internal spline | Manual, pneumatic | 1.62 | 250 | MR85 |
| MR85Q | Protrusion connection | Manual, pneumatic | 1.62 | 250 | MR85 |
| MR85E | Internal spline | Manual, pneumatic | 1.72 | 250 | MR85 |
| MR85E | Protrusion connection | Manual, pneumatic | 1.72 | 250 | MR85 |
| MR78QF | Internal spline | Manual, pneumatic | 1.67 | 200 | MR78Q |
| MR78QF | Protrusion connection | Manual, pneumatic | 1.67 | 200 | MR78Q |
| MW525F-1 | End key | Manual | 1.42 | 250 | MW525F1-3 |
| MW520QDL | Internal spline | Manual, pneumatic | 1.42 | 250 | MW520 |
| MW520QDA | Protrusion connection | Manual, pneumatic | 1.42 | 250 | MW520 |
| 03 Xihu (West Lake) Dis.feng series | |||||
| DF5S300 | Internal spline | Pneumatic | 1.57 | 250 | DF5S300 |
| DF5S300 | Protrusion connection | Pneumatic | 1.57 | 250 | DF5S300 |
| DF5S40 | Internal spline | Pneumatic | 1.49 | 300 | DF5S40 |
| DF5S40 | Protrusion connection | Pneumatic | 1.49 | 300 | DF5S40 |
| DF5S550 | Internal spline | Pneumatic | 1.47 | 300 | DF5S550 |
| DF5S550 | Protrusion connection | Pneumatic | 1.47 | 300 | DF5S550 |
| DF5S600 | Internal spline | Pneumatic | 1.53 | 300 | DF5S600 |
| DF5S600 | Protrusion connection | Pneumatic | 1.53 | 300 | DF5S600 |
| DF6S650 | Internal spline | Pneumatic | 1.57 | 300 | DF6S650 |
| DF6S650 | Protrusion connection | Pneumatic | 1.57 | 300 | DF6S650 |
| DF6S900 | Internal spline | Pneumatic | 1.58 | 350 | DF6S900 |
| DF6S900 | Protrusion connection | Pneumatic | 1.58 | 350 | DF6S900 |
| 04 Xihu (West Lake) Dis.i series | |||||
| LC5T88 | Internal spline | Pneumatic, manual | 1.56 | 150 | QL15C-04/SDQ51 |
| LC5T88 | Protrusion connection | Pneumatic, manual | 1.56 | 150 | QL15C-02 |
| LC5T26 | Internal spline | Pneumatic, manual | 1.63 | 150 | QL15C-03 |
| LC5T26 | Protrusion connection | Pneumatic, manual | 1.63 | 150 | QL15C-03 |
| LC5T97 | Internal spline | Pneumatic, manual | 1.57 | 200 | QL15A-01 |
| LC5T97 | Protrusion connection | Pneumatic, manual | 1.57 | 200 | QL15A-01 |
| MSB-5M | Internal spline | Manual | 1.56 | 150 | QL15C-02 |
| MSB-5M | Protrusion connection | Manual | 1.56 | 150 | QL15C-02 |
| LC6T46 | Internal spline | Manual | 1.79 | 250 | SDQ50/69LGQ1 |
| LC6T46 | Protrusion connection | Manual | 1.79 | 250 | SDQ50/69PQ1 |
| LC6T55 | Internal spline | Manual | 1.56 | 300 | QL30M-01 |
| LC6T55 | Protrusion connection | Manual | 1.56 | 300 | QL30M-01 |
| LC6T450 | Internal spline | Manual | 1.47 | 300 | QL30E-06 |
| LC6T450 | Protrusion connection | Manual | 1.47 | 300 | QL30E-06 |
| LC6T540 | Internal spline | Pneumatic | 1.47 | 300 | HWP-X31/63TQ |
| LC6T540 | Protrusion connection | Pneumatic | 1.47 | 300 | HWP-X31/63TQ |
| LC5T400 | Internal spline | Pneumatic | 1.53 | 300 | SDQ50/74PQ1 |
| LC5T400 | Protrusion connection | Pneumatic | 1.53 | 300 | QL15D-06 |
| LC5T150 | Internal spline | Pneumatic | 1.43 | 300 | QL12J |
| LC5T150 | Protrusion connection | Pneumatic | 1.43 | 300 | QL12J-01 |
| LC5T28 | Internal spline | Pneumatic | 1.57 | 200 | HWP-T38/63CHQ |
| LC5T28 | Protrusion connection | Pneumatic | 1.57 | 200 | HWP-T38/63CHQ |
| LC5T190 | Internal spline | Pneumatic | 1.63 | 300 | QL12G/QL12G-02 |
| LC5T190 | Protrusion connection | Pneumatic | 1.63 | 300 | QL12G/QL12G-02 |
| LC5T30 | Internal spline | Pneumatic | 1.49 | 200 | SDQ50/71LGQ1 |
| LC5T30 | Protrusion connection | Pneumatic | 1.49 | 200 | SDQ50/71PQ1 |
| ML642 | Internal spline | Pneumatic | 1.51 | 300 | SDQ5065PS-B |
| ML642 | Protrusion connection | Pneumatic | 1.51 | 300 | SDQ5065PS-B |
| 05 ZheJiang fast | |||||
| 8JS85E | Internal spline | Pneumatic | 1.26 | 300 | 8JS85E |
| 8JS85F | Internal spline | Pneumatic | 1.32 | 300 | 8JS85F |
| 8JS85C | Internal spline | Pneumatic | 1.17 | 300 | 8JS85C |
| 8JS60T | Internal spline | Pneumatic | 1.42 | 300 | 6DS60T |
| 8JS118 | Internal spline | Pneumatic | 1.53 | 350 | 8JS118 |
| 8JS119 | Internal spline | Pneumatic | 1.53 | 350 | 9JS119 |
| 06 heavy truck series | |||||
| DC5J80 | Internal spline | Pneumatic | 1.47 | 300 | DC5J80 |
| DC6J65 | Internal spline | Pneumatic | 1.61 | 300 | DC6J65 |
| DC6J85 | Internal spline | Pneumatic | 1.47 | 300 | DC6J85 |
| DC6J95 | Internal spline | Pneumatic | 1.41 | 350 | DC6J95 |
| DC7J120 | Internal spline | Pneumatic | 1.37 | 350 | DC7J120 |
| HW25505 | Internal spline | Pneumatic | 1.37 | 350 | HW25505 |
| HW9571 | Internal spline | Pneumatic | 1.4 | 350 | HW9571 |
| 07 Xihu (West Lake) Dis. series | |||||
| SC5T45 | Internal spline | Pneumatic | 1.54 | 300 | SC5P45 |
| SC6E-45 | Internal spline | Pneumatic | 1.47 | 300 | SC6E-45 |
| SC6T53 | Internal spline | Pneumatic | 1.47 | 300 | SC6T53 |
| SC5D | Internal spline | Pneumatic | 1.51 | 300 | SC5D |
| SC6J85 | Internal spline | Pneumatic | 1.42 | 300 | SC6J85 |
| SC7E | Internal spline | Pneumatic | 1.54 | 350 | SC7E |
| 8S-45 | Internal spline | Pneumatic | 1.57 | 300 | SC85-45 |
| SC8S×one | Internal spline | Pneumatic | 1.61 | 300 | SC8S×one |
| SC6S | Internal spline | Pneumatic | 1.48 | 300 | SC6S |
| SC6S×one | Internal spline | Pneumatic | 1.51 | 300 | SC6S×one |
| 08 FAW | |||||
| CA525 | Hand spline chain | Manual | 1.57 | 150 | CA5-25 |
| CA539 | Internal spline | Pneumatic | 1.44 | 200 | CA5-38 |
| CA653 | Internal spline | Pneumatic | 1.47 | 250 | CA6-53 |
| CA6-75 | Internal spline | Pneumatic | 1.47 | 250 | CA6-75 |
| CA6-85 | Internal spline | Pneumatic | 1.47 | 300 | CA6-85 |
| CA6-120 | Internal spline | Pneumatic | 1.38 | 300 | CA-120 |
| CA6-150 | Internal spline | Pneumatic | 1.43 | 300 | CA6-150 |
| CA7-90 | Internal spline | Pneumatic | 1.47 | 350 | CA7-90 |
| CA7-100 | Internal spline | Pneumatic | 1.47 | 350 | CA7-100 |
| 09 Tang Ling HangZhou | |||||
| TC528 | Internal spline | Manual pneumatic | 1.31 | 150 | TC5-28 |
| TC535 | Internal spline | Manual pneumatic | 1.43 | 200 | TC5T35 |
| TC545 | Internal spline | Pneumatic | 1.47 | 250 | TC5-45 |
| TC6T53 | Inner spline | Pneumatic | 1.47 | 250 | TC653 |
| TC650 | Inner spline | Pneumatic | 1.54 | 300 | TC650 |
| JS550 | Inner spline | Pneumatic | 1.47 | 300 | JS550 |
| JS5646 | Internal spline | Pneumatic | 1.53 | 250 | JS646 |
| JS6-950 | Internal spline | Pneumatic | 1.49 | 300 | JS6-950 |
| JS6-750 | Internal spline | Pneumatic | 1.52 | 300 | JS6-750 |
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Application: | Motor, Machinery, Agricultural Machinery, Car, Hydraulic Gear Pump Crane ( Oil Pump, Fuel Pump |
|---|---|
| Function: | Distribution Power |
| Hardness: | Hardened Tooth Surface |
| Samples: |
US$ 580/Piece
1 Piece(Min.Order) | Order Sample PTO
|
|---|
| Customization: |
Available
| Customized Request |
|---|
Types of Vehicle Gearboxes
In a vehicle, there are many types of gearboxes available. There are planetary gearboxes, Coaxial helical gearboxes, and skew bevel helical gearboxes, among others. In this article, we’ll cover all of them and help you determine which type of gearbox would be right for your vehicle. Also, we’ll discuss how each differs from the others.
planetary gearbox
A planetary gearbox is composed of three main components: a sun gear, an input bevel gear, and an output shaft. A planetary gearbox can have different output torques and ratios. The basic model of a planetary gearbox is highly efficient and transmits 97% of the power input. There are several kinds of planetary gearboxes, depending on the type of operation. In general, there are three types: the simple, the intermediate, and the complex.
The price of a planetary gearbox can vary a lot, and it’s important to know what you’ll need. Different manufacturers produce different planetary gearboxes, so check with a manufacturer to see what they have available. Make sure to check the quality of the planetary gearbox before making a final purchase. In addition, be sure to compare the prices and the availability of a particular product. A quality planetary gearbox will provide years of trouble-free operation and will not break your bank.
Planetary gears feature an integer number of teeth. Each planet has teeth that must mesh with its ring or sun. The number of planets, ring, and tooth count of each gear determine whether the teeth mesh. Some planets have fewer teeth than others, so they mesh better than others. However, compound planets can be more flexible and achieve higher reduction ratios. If you’re looking for a planetary gearbox for your next project, consider getting in touch with a manufacturer who specializes in this technology.
When it comes to construction, a planetary gearbox is no exception. It’s extremely important to choose the right planetary gear for your application, because an imbalance in the planet gear can cause increased wear and failure. Moreover, the compact size of a planetary gear ensures maximum heat dissipation. However, a planetary gear box may require cooling in some applications. A planetary gearbox will make your life easier, and it will give you years of trouble-free operation.
Straight bevel helical gearbox
The Straight bevel helical gearbox has a number of advantages, but it has a relatively short manufacturing process. Its most popular application is in the automotive industry, where it is used in many types of vehicles. Other applications include heavy and light equipment and the aviation and marine industries. Below is a brief introduction to this gearbox type. Read on to learn about its benefits. This type of gearbox is one of the easiest to manufacture.
The spiral bevel gear has larger teeth than straight bevel gears, resulting in a smoother, quieter rotation. It can handle high-speed heavy loads with less vibration. Spiral bevel gears are classified by their tooth form and cutting method. Straight bevel gears are easier to design and manufacture, but spiral bevel gears are more expensive. Both designs are suitable for high-speed, heavy-load operations, and general manufacturing applications.
In addition to being easy to install, the modular bevel gears have many advantages. They have an exceptionally high degree of interchangeability and feature the highest standards of component integrity. They can also be tailored to meet your specific requirements. The advantages of this gearbox type include high precision, optimum performance, and low noise. And because they are modular, they can be produced in a variety of finishes. These include stainless steel, titanium, and bronze.
Straight bevel helical gearbox manufacturers are committed to a high degree of precision in their designs. The radii, torques, and tooth profiles of straight bevel gears are more precisely measured than those of cylindrical bevel gears. The same calculations are used for all traditional bevel gear generators. This ensures that your 5-axis milled bevel gear sets have the same calculations and layout.
Coaxial helical gearbox
The Coaxial helical gearbox is a highly efficient transmission system that is well suited for light-duty applications. Compared to spur-type gearboxes, the real pitch of a Coaxial helical gearbox is low at all helix angles. This is because the coaxial type has the same number of teeth and center gap as the spur gearbox. Coaxial helical gearboxes also have a smaller footprint and are compact.
Several nations have implemented lockdown regulations for Industrial Gearbox trade, threatening the global economy. Several factors have been implicated in COVID-19, including supply chain, market, and financial markets. Experts are monitoring the situation globally and project remunerative prospects for gearbox manufacturers after the crisis. This report depicts the latest scenario and offers a comprehensive analysis of COVID-19’s impact on the entire industry.
This Coaxial helical gearbox features a compact structure and high precision gear. Its three-stage design combines two-stage gears with a single-stage gear, forging high-quality alloy steel for high precision and durability. The gears are serially-designed for easy interchangeability. They are also available in high-frequency heat-treated steel. A Coaxial helical gearbox is the perfect solution for many applications.
Coaxial helical gearboxes have the added benefit of using cylindrical gears instead of shafts. They operate quietly, and have more surface area to interact with. Their fixed angles make them suitable for heavy-duty applications, like in conveyors, coolers, and grinders. Compared to other gearbox types, Helical gearboxes have higher power-carrying capacity. Listed below are the benefits of a Coaxial Helical Gearbox
Skew bevel helical gearbox
A Skew bevel helical gear box is a common type of industrial gearbox. These gearboxes are rigid and compact and can be used in a variety of applications. They are commonly used in heavy-duty applications such as grinding mills, conveyors, and coolers. They are used in many applications to provide rotary motions between non-parallel shafts. They also have the added benefit of high-efficiency in a variety of industries.
Skew bevel helical gear boxes are suitable for heavy loads and are monolithic in construction. This type of gearbox combines the benefits of bevel and helical gears for right-angle torque, which makes it a popular choice for heavy-duty applications. In addition to being a robust and reliable gearbox, these gearboxes are highly customizable and can meet almost any industrial need.
To maximize the efficiency of bevel gears, FE-based tooth contact analysis is used to develop a sophisticated geometry optimization algorithm. The software also allows users to define optimal flank topography by introducing application-specific weightings for specific load levels. With this data, a manufacturing simulation is conducted to determine the best variant. A robust variant combines the benefits of efficiency, load-carrying capacity, and low excitation behavior.
The helical gear can be angled at 90 degrees. This is similar to a spur gear but produces less noise. It can achieve a nine-to-one speed reduction with one stage. However, a helical gear requires a larger driver gear for higher reductions. This gearbox is suitable for speeds from 1:1 to three times. They are often used in the manufacture of motors and generators.
Extruder helical gearbox
An extruder helical gearbox is one of the most common industrial gears. It is compact in size and low-power consuming, making it ideal for heavy-duty applications. Extruder helical gearboxes are suitable for a variety of industrial applications, including cement, plastics, rubber, conveyors, and coolers. In addition to its use in plastics and rubber manufacturing, this gearbox is also useful in other low-power applications such as crushers, coolers, and conveyors.
CZPT SG series Extruder Helical Gearboxes are available in Single Screw and Twin Screw Variations. These gears feature a compact design, high power density, and long service life. Axial bearing housing and thrust bearings are mounted on the input shafts. Extruder helical gearboxes can be installed in various positions, including horizontal, vertical, and inclined.
Helicoidal gears are often produced in a modular manner. This design provides multiple benefits, including engineering and performance advantages, modular production, and the highest level of component integrity. A single helical gearbox can be assembled into a larger gearbox if needed, but modular production ensures consistent performance and economy. This modular design is also cost-effective. It is a versatile and reliable solution for a wide range of applications.
In addition to its efficiencies, Extruder helical gearboxes also have a low noise profile. They have no squeal sounds, and they are silent when running. They can transfer more power than conventional gearboxes. This type of gear has been used in the manufacturing of high-quality plastic products for years. They are often used for applications in automotive transmissions. Aside from being quiet, helical gears have higher contact levels and lower vibration.
editor by CX 2023-07-13