Product Description

Product Description

>Introduction
ZLYJ series Reduction Gearbox (speed reducer) is a transmission part for most single screw extrusion line, wihch also possesses high precision hard gear surface and thrust block designed. Designed with standard ZBJ19009-88, it combines well with most of machines from different suppliers. Also the gear and axis parts are made of high strength alloy steel with surface hardness HRC54~62. In the front end of hollow input axis there is large specification thrust bearing that will bear axial thrust force while the screw is working
 

>Applied Circumstance
1. All kind of extrusion & blowing machinery
2. High speed shaft rotation Speed <1500RPM
3. Working Environment Temp. -40~45°C, with temperature below 0°C, should pre-heat lubrication oil to above 0°C
 

>Major Technical Index
1. Output Speed: 16-100 RPM
2. Output Torque: Max.4300 Nm
3. Motor Power: 5.5-200 Kw
 

>Selection of Gearbox
1. Select speed ratio
e.g. input speed n1=1000rpm, output speed n2=70rpm, ratio i=n1/n2=14.28, should select ratio 14
2. Select model type according to input power
e.g. input power P=26kw, after checking form, 29kw>26kw, most ecomonic should be ZLYJ200
3. Select assemble type
as per actual use, select horizontal or vertical type
4. Calculate axial thrust Fa=π*Ds²*Ps/(4*1000)
e.g. Screw diameter Ds=75mm, Screw pressure Ps=26MPa
Fa=π*Ds²*Ps/(4*1000)=114.8kN
187kN>114.8kN, ZLYJ200 can bear the axial thrust and economic to select
5. Confirm connection size
6. Confirm cooling type

Parameters Concerned

Recommended Products

EXTRUSION SCREW BARREL         INJECTION SCREW BARREL         TWIN SCREW BARREL