Product Description
Spline Key Output PTO SDQWL31-46LGQ1 For WLY5TS40 Gearbox Power Take-off ( WLY Transmissions Power Take off)
(DFAC CZPT CZPT JAC CZPT Truck WLY Fast Transmissions Power Take off)
WanLiYang series power take off (WLY PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WL24/37 |
1.176 |
250 |
10H30 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WL24/38 |
1.077 |
3-01 connector. |
| Tell: tictrucks HangZhou City ZheJiang Province China | ||||
| Gearbox Factory | Gearbox Transmission Model tictrucks |
SZ OBM Model | Brief data PTO | |
| PTO ODM MODEL | Truck brand | |||
| HaChi Gearbox | C171757121-8C CA6-75AB19 CATS6-62 CA6T-123 6T120 JS6-550 TS6-53(Direct) | -8C | SDQ12/68 | FAW |
| HangZhou | C1 | FAW | ||
| HaChi Gearbox | TZ17-449 CA6T-138(FAW Eaton) | 6-74 | SDQ15/75 | FAW |
| Xihu (West Lake) Dis.feng | 17V20 17V70–Q17421(HangZhou) JC5-20T23(HangZhou) 17G0A8-LB27 17G0A88-QB80 17G1A8-20 17G0A5-EG05-B | SDQ23/30 | Furika | |
| LG | LG520Q3 LG525Q Mengwo170571-Q17571 MW525CL 17G0AB02 WLY520 | 525 | SDQ23/32 | FOTON Furika |
| SDQ33/32 | ||||
| YY | SYC07 170571-C64-E31121 TC5-30HKA20(Tangchi) TC5-30HFE9(Tangchi) YC5-30V06 LG535QHZJB1 | 1061 | SDQ23/37 | FOTON Furika |
| WLY | WLY5TS32-73–LD4-90651 17KW1-N9-N9-Q17421 | |||
| LC JAC | 2830.5 | SDQ42/27 | IVCO NAVECO | |
| LC JAC | LC6T35 | SDQ50/35 | JAC | |
| LC JAC | LC6T46(A2Q25) LC6T450MT(AZQ28) WLYZ6S46( ) | 646 | SDQ50/45 | FOTON AUMARK |
| WLY | WLY6S46 | 646 | SDQ50/69 | |
| LC JAC | LC6T540 15CO7571 | SDQ50/63 | JAC | |
| LC JAC | LC5T97 LC5T30( 6teeth) | 5T97 | SDQ50/71 | |
| LC JAC | LC5T400M1(A2Q08) | 5T35 | SDQ50/74 | FOTON Oling |
| NISSAN Z F5S400V | SDQ51/44 | NISSAN | ||
| ZheJiang | MSB-5M(A2Q05) LC5T88(6 teeth) | IUZU QINGLING | SDQ51/62 | IUZU QINGLING |
| ZheJiang | MSB-5M(A2Q05) LC5T88(6 teeth) | SUZU QINGLING | SDQ51/63 | SUZU QINGLING |
| DN3-70030-E0 6MT1420 | DN3 | SDQ51/65 | SUZU QINGLING | |
| ISZU QINGLING | MSB-5S/5M/5SM 5MT1280JD JC526T3D | 1571 5T88 | SDQ51/74 | JMC small |
| WLY | WLY5TS32C-58-32 | Xihu (West Lake) Dis.feng | ||
| WLY5TS32-31-32 | Xihu (West Lake) Dis.feng | |||
| HangZhou | JC528T8 | 1571 5T88 | SDQ51/67 | JMC |
| ZheJiang | ISZU MRB6P( EURO3) | SDQ52/74 | ISZU QINGLING | |
| ZheJiang | MRB6Q MLD6Q | 5T ISZU | SDQ52/77 | ISZU QINGLING |
| FAST | 8JS85E 17JK-G18569(JiangKai) | 85E | QD40A | FAST, Xihu (West Lake) Dis.feng |
| RT-11609A RT-11509C | SDQ211/70-A | Xihu (West Lake) Dis.feng, FAW,Xihu (West Lake) Dis.n IVCO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN Xihu (West Lake) Dis. Runze Special Vehicle |
||
| 17G0A9-22 9JS135T-B | SDQ211/70-1 | |||
| 9JS119T-B(170571-K14E3) | SDQ211/70-3 | |||
| 9JS119TA | SDQ211/70-4 | |||
| RTO-11609B RT-11509F | SDQ211/70-5 | |||
| 12JS160TA | SDQ212/70-1 | Xihu (West Lake) Dis.feng, Xihu (West Lake) Dis.n IVCO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN | ||
| 12JD160TA 12JD180T | SDQ212/70-2 | |||
| A5J38T | QC20A | FOTON | ||
| NAVECO | 17H30 | tictrucks | IVEVO NAVECO | |
Power take-off products
Model list of power take-off
FAW Xihu (West Lake) Dis. power take off (FAW PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-YQ12/68 |
1.24 |
250 |
CA6T-123/TS6-53 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-YQ12/72 |
1.199 |
250 |
CA6T-123/TS6-53 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-YQ13/70 |
1.08 |
300 |
CATS6-75A/1700940-680 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-YQ15/75 |
1.006 |
350 |
CATS6-75(74), TZ1700940H4G,CA6T-138 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-YQ15/52 |
1.179 |
400 |
CA6T138 |
Internal spline / flange |
Pneumatic (dynamic clutch) |
Xihu (West Lake) Dis.feng series power take off (DF PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-DF21/33 |
1.044 |
250 |
17C-00030,17G0A4-08, |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-DF22/47 |
1.2 |
600 |
Dt0690 overdrive |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-DF22/47-A |
1.03 |
600 |
Dt0690 overdrive |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-DF24/42 |
1.2 |
600 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-DF24/42-B |
1.03 |
450 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-DF24/45 |
1.2 |
600 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-DF24/45-B |
1.03 |
450 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-DF24/65 |
1.06 |
400 |
DF6S-750 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-DF24/64 |
1.06 |
400 |
DF6S750/DF6S650 |
Internal spline / flange |
Pneumatics |
|
10 |
SDQ-DF24/69 |
1.211 |
350 |
17K1/17KT6K-00030, 17K17-00030/17G1A7-15, 17K23-00030/17G0A7-15 |
Internal spline / flange |
Pneumatics |
|
11 |
SDQ-DF25/63 |
1.23 |
350 |
17G1A7-41/17F40(44/62) /17g0a7-21 (41) / jiangft 650H |
Internal spline / flange |
Pneumatics |
|
12 |
SDQ-DF26/31 |
1.45 |
350 |
DC6J70T/17G0A3-08(09/15/ 25/96)/Zqc6t-75 / 750 |
Internal spline / flange |
Pneumatics |
|
13 |
SDQ-DF27/21 |
1.845 |
350 |
DC85JTZ/17G0Z56-571/17G 0A3-33(35/36)/17G571-N9 002/14G0A3-32(34) /DC6J85TZ |
Internal spline / flange |
Pneumatics |
|
14 |
SDQ-DF27/53 |
1.35 |
350 |
17G0A9-Z67D/DC7J100TB/1 7G0A9-45(-24-00030) |
Internal spline / flange |
Pneumatics |
|
15 |
SDQ-DF27/55 |
1.216 |
300 |
17g0a3-32 (33 / 34 / 35 / 36) straight Connecting gear / dc6j85tz (direct gear) |
Internal spline / flange |
Pneumatics |
|
16 |
SDQ-DF27/65 |
1.07 |
350 |
DC7J100TC,17G0A9-Z66D |
Internal spline / flange |
Pneumatics |
|
17 |
SDQ-DF27/66 |
1.26 |
350 |
Dc6j85tz (overdrive) /17G0A3-54/170571-A9000 |
Internal spline / flange |
Pneumatics |
|
18 |
SDQ-DF28/55 |
1.3 |
400 |
17GOA3-38/17N29-00030 |
Internal spline / flange |
Pneumatics |
|
19 |
SDQ-DF28/65 |
1.55 |
350 |
Dc7j120tb (overdrive) /01-00030 |
Internal spline / flange |
Pneumatics |
|
20 |
SDQ-DF28/72 |
1.84 |
350 |
Dc7j120tc (direct gear) /01-00030 |
Internal spline / flange |
Pneumatics |
Jac Xingrui series power take off (JAC)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-XR50/35 |
1 |
300 |
LC6T55 WLY6TS55 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-XR50/45 |
1.1 |
280 |
LC6T46/LC6T450 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-XR50/60 |
1.1435 |
300 |
LC6T540 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-XR50/63 |
1.11 |
300 |
LC6T540/15CO7571 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-XR50/65 |
1.6433 |
250 |
ML642A-A9 |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-XR50/67 |
1.1541 |
250 |
ML532A |
Internal spline / flange |
Pneumatic / manual |
|
7 |
SDQ-XR50/69 |
1.1 |
280 |
LC6T46/LC6T450 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-XR50/71 |
1.17 |
200 |
LC5T97/LC5T30 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-XR50/74 |
1.03 |
200 |
LC5T35/LC5T40 |
Internal spline / flange |
Pneumatics |
|
10 |
SDQ-XR23/55 |
1.12 |
300 |
LC6T450M1 |
Internal spline / flange |
Pneumatic / manual |
|
11 |
SDQ-XR37/77 |
1.55 |
200 |
ML532C |
Internal spline / flange |
Pneumatic / manual |
Qingling Iuzu series power take off (Iszu PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WS51/62 |
1.3 |
150 |
Msb-5m / starray lc5t88 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WS38/63 |
1 |
150 |
Msb-5m / starray lc5t88 |
Internal spline / flange |
Pneumatic / manual |
|
3 |
SDQ-WS32/64 |
1.095 |
300 |
MYY-6S |
Internal spline / flange |
Pneumatic / manual |
|
4 |
SDQ-WS35/74 |
1.63 |
180 |
MSB-5M/MSB-5S/MSB-5SM/LC5T88
LC5T25/LC5T255M3/LC5T28 |
Internal spline / flange |
Pneumatic / manual vacuum |
|
5 |
SDQ-WS52/77 |
1.18 |
250 |
MLD-6Q/MLD6A |
Internal spline / flange |
Pneumatics |
JMC series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-GT32/65 |
1.26 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
2 |
SDQ-GT51/67 |
1.2 |
200 |
JC5T28/5T26.5/MTI280JD |
Internal spline / flange |
Pneumatic / manual |
|
3 |
SDQ-GT32/65-A |
1.315 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
4 |
SDQ-GT32/65-B |
1.09 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
5 |
SDQ-GT32/65-C |
1.26 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
Z F series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-Z F51/38 |
1.077 |
300 |
Z F6S500/Z F6S600/Z F6S558 Z F6S508/Z F6S458 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-Z F51/44 |
1 |
250 |
Z F5S400 |
Internal spline / flange |
Manual |
|
3 |
SDQ-Z F48/39 |
1.063 |
250 |
Z F5S408/Z F5S328 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-Z F211/65 |
0.772 |
650 |
TraXon12 |
Internal spline / flange |
Pneumatics |
Fast PTO power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-FS212/70 |
0.94 |
600 |
12JSD160TA |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-FS212/70-A |
0.78 |
600 |
12JSD160TA |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-FS19/31 (QD40A) |
1.09 |
400 |
8JS75 |
Internal spline |
Pneumatics |
|
4 |
SDQ-FS24/37 ( QCZ70A) |
0.93 |
600 |
6J80T |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-FS211/60 |
1.1 |
350 |
FAST ETON |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-FS211/70 |
0.94 |
600 |
Fuller / fast / rt-11509c 8JS100S/17G0A9-22 |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-FS211/70-A |
0.78 |
600 |
Fuller / fast / rt-11509c 8JS100S/17G0A9-22 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-FS34/29 |
400 |
8JS75 |
Internal spline / flange |
Pneumatics |
WanLiYang series power take off (WLY PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WL24/37 |
1.176 |
250 |
10H30 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WL24/38 |
1.077 |
300 |
6G55 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-WL24/40 |
1.333 |
300 |
6G40A |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-WL31/39 |
1.1 |
300 |
6G40A |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-WL24/43 |
1.087 |
300 |
5G40 |
Internal spline / flange |
Pneumatic / manual / vacuum |
|
6 |
SDQ-WL24/44 |
1.043 |
300 |
6G40B |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-WL24/59 |
1.094 |
300 |
6G120/6G70 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-WL24/60 |
1.3 |
300 |
6TS40 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-WL24/63 |
1.39 |
180 |
5TS32 |
Internal spline / flange |
Pneumatic / manual |
|
10 |
SDQ-WL 24/63-B |
1.39 |
180 |
5G32A |
Internal spline / flange |
Pneumatic / manual |
|
11 |
SDQ-WL 24/66 |
1.359 |
180 |
5TS32-C |
Internal spline / flange |
Pneumatic / manual |
|
12 |
SDQ-WL 24/66-B |
1.146 |
180 |
5G32B/5G32C |
Internal spline / flange |
Pneumatic / manual |
|
13 |
SDQ-WL 24/67 SDQ-WL 25/67 |
1.147 |
300 |
6T120/6S46/6S51 |
Internal spline / flange |
Pneumatics |
|
14 |
SDQ-WL 24/70 |
1.15 |
200 |
6S46B (2015-4-25) |
Internal spline / flange |
Pneumatic / manual |
|
15 |
SDQ-WL 24/71 SDQ-WL 25/71 |
1.11 |
300 |
6S51B/6S46B |
Internal spline / flange |
Pneumatic / manual |
|
16 |
SDQ-WL 24/72 |
1.133 |
300 |
6TS55E/6TS60 |
Internal spline / flange |
Pneumatic / manual |
|
17 |
SDQ-WL23/63 |
1.35 |
350 |
10H46 |
Internal spline / flange |
Pneumatics |
|
18 |
SDQ-WL23/71 |
1.15 |
400 |
7TS60 |
Internal spline / flange |
Pneumatics |
|
19 |
SDQ-WL24/75 |
1 |
400 |
7TS60B |
Internal spline / flange |
Pneumatics |
|
20 |
SDQ-WL25/70 |
1.244 |
400 |
7TS60C |
Internal flange / spline |
Pneumatics |
|
21 |
SDQ-WL24/73 |
1.07 |
400 |
7TS60D |
Internal spline / flange |
Pneumatics |
|
22 |
SDQ-WL25/33 |
1.228 |
350 |
10h46 (right) |
Internal spline / flange |
Pneumatics |
|
23 |
SDQ-WL27/70 |
1.08 |
150 |
5TS40 |
Internal spline / flange |
Pneumatics |
|
24 |
SDQ-WL31/46 |
1.2 |
180 |
5TS40 |
Internal spline / flange |
Pneumatics |
|
25 |
SDQ-WL211/100 |
1 |
1000 |
9G90 |
Internal spline / flange |
Pneumatics |
SINOTRUCK CZPT PTO power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-ZD27/61 |
1.1 |
600 |
DC7J120T |
Flange flange |
Pneumatic (dynamic clutch) |
|
2 |
HW50 |
0.739 |
500 |
HW14710/HW18710 HW15710/HW19710 |
Internal flange / spline |
Pneumatics |
|
3 |
HW70 |
0.793 |
700 |
HW18709/HW18710 |
Internal spline / flange |
|
|
4 |
HW80Q-F301 |
800 |
HW9571C1 |
Flange flange |
Pneumatics |
|
|
5 |
HW140Q-F301 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
6 |
HW140Q-F302 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
7 |
HW140Q-F303 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
8 |
HW140Q-F305 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
9 |
HW60Q-F300 |
0.686 |
600 |
HW12706 |
Flange flange |
Pneumatics |
Other series of power take-off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-HL211/65 |
0.772 |
650 |
Soda gearbox 12sob1500 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-HL211/100 |
1 |
1000 |
Soda gearbox 12sob1500 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-NQ42/26 |
1.15 |
150 |
NAC 2830.5 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-NQ42/27 |
1.15 |
150 |
NAC 2830.5 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-SQ42/77 |
1.13 |
300 |
SAIC sc50m6d |
Internal spline / flange |
Pneumatics |
New energy Electric Power Truck series power take off PTO
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-LK31/38 |
1.043 |
300 |
HangZhou green control 6s100 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-LK24/36 |
1.136 |
300 |
HangZhou green control j6s95 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-LK20/56 |
1.148 |
300 |
HangZhou green control j2s130 |
Internal spline / flange |
Pneumatics |
Export series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
Pto1000 series |
0.6- 1.88 |
300 |
EATON FS 3005/4005 EATON 6305 |
Internal flange / spline |
Pneumatics |
|
2 |
Pto2000 series |
0.6- 1.88 |
350 |
Eaton fuller CZPT rt-11109a / rt-6609a rt-7608a Allison Ellison M-5600/M-6600/S-5600 S-6600 |
Internal spline / flange |
Pneumatics |
|
3 |
3131(BZ) |
0.84-2.9 4 |
450 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
4 |
3252(BZ) |
0.81-1.8 5 |
300 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
5 |
3151(BZ) |
0.84-2 |
540 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Constant mesh |
|
6 |
3300 |
0.74-1 |
390 |
Allison Ellison MD-1000/MD-2000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
7 |
PTO852 |
1.13 |
650 |
Allison |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
8 |
103K_03(BZ) |
0.77-0.55 |
650 |
S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |
|
9 |
1571K_03 (BZ) |
0.76 |
420 |
Z F S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |
ZheJiang Xihu (West Lake) Dis. Runze Special Vehicle
Certifications
Packaging & Shipping
FAQ
1.Are you trading company or manufacturer ?
We are Group Corporation manufacturer ,have Group Factories Contractor.
2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.
3. What’s the delivery time and can you lower the price?
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
4.Can you supply some quick-wear parts?
Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
6.Do you have any used products for sale?
We have products in stock for choices,the prices are favorable,we’ll show you our stock products if you need.
7.What’s the payment terms?
TT 30% as deposit, balance before shipment by TT or at sight.
8. How to guarantee customers get the goods smoothly after they payment?
Don’t worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don’t delivery products, the deposit will be returned to you.
9.How can you ensure the quality of the products?
Don’t worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.
parking of vehicles.
HWP type Power Take-Off
| No | PTO Model | Ratio | Torque | Transmission | Output Mode | Control | Position |
| 1 | HWP-X23/55CHQ | 1.1206 | 300N.M | LC6T450M1 | Spline | Pneumatic | Side |
| 2 | HWP-X23/55TQ | 1.1206 | 300N.M | LC6T450M1 | Flange | Pneumatic | Side |
| 3 | HWP-X30/71CHQ | 1.5517 | 250N.M | LC5T30 | Spline | Pneumatic | Side |
| 4 | HWP-X30/71TQ | 1.5517 | 260N.M | LC5T30 | Flange | Pneumatic | Side |
| 5 | HWP-X31/63CHQ | 1.1099 | 300N.M | LC6T540 | Spline | Pneumatic | Side |
| 6 | HWP-X31/63TQ | 1.1099 | 300N.M | LC6T540 | Flange | Pneumatic | Side |
| 7 | HWP-X31/74CHQ | 1.5621 | 250N.M | LC5T40 | Spline | Pneumatic | Side |
| 8 | HWP-X31/74TQ | 1.5621 | 250N.M | LC5T40 | Flange | Pneumatic | Side |
| 9 | HWP-I35/62CHS | 1.2971 | 200N.M | MSB-5M | Spline | Manual | Side |
| 10 | HWP-I35/62TS | 1.2971 | 200N.M | MSB-5M | Flange | Manual | Side |
| 11 | HWP-X35/65CHQ | 1.6433 | 250N.M | ML642A | Spline | Pneumatic | Side |
| 12 | HWP-X35/65TQ | 1.6433 | 250N.M | ML642A | Flange | Pneumatic | Side |
| 13 | HWP-X35/65CHQ-A | 1.096 | 250N.M | ML642A | Spline | Pneumatic | Side |
| 14 | HWP-X35/65TQ-A | 1.096 | 250N.M | ML642A | Flange | Pneumatic | Side |
| 15 |
HWP-I35/74CHQ |
1.8 |
250N.M |
MSB-5M |
Spline |
Pneumatic |
Side |
| 1.536 | LC5T28 | ||||||
| 1.82 | LC5T88 | ||||||
| 16 |
HWP-I35/74TQ |
1.8 |
250N.M |
MSB-5M |
Flange |
Pneumatic |
Side |
| 1.536 | LC5T88 | ||||||
| 1.82 | LC5T28 | ||||||
| 17 |
HWP-I35/74CHS |
1.8 |
250N.M |
MSB-5M |
Spline |
Manual |
Side |
| 1.536 | LC5T28 | ||||||
| 1.82 | LC5T88 | ||||||
| 18 |
HWP-I35/74TS |
1.8 | MSB-5M |
Flange |
Manual |
Side |
|
| 1.536 | LC5T28 | ||||||
| 1.82 | LC5T88 | ||||||
| Note |
The above listed are the models and special specifications of common power take-off assemblies, or if you need to customize, please call for details. |
||||||
| Model Of Power Takeoff | Handling Out Method | Operation Mode | Speed Ratio | Rated Torque | Suitable Transmission Model |
| 01 WanLiYang series | |||||
| WLY525 | Internal spline | Manual, pneumatic | 1.56 | 200 | WLY525 CA525 |
| WLY525 | Protrusion connection | Manual, pneumatic | 1.56 | 200 | WLY525 CA525 |
| WLY5T32 | Internal spline | Manual, pneumatic | 1.46 | 150 | WLY5T26 5T32 |
| WLY5T32 | Protrusion connection | Manual, pneumatic | 1.46 | 150 | WLY5T26 5T32 |
| WLY5GS32 | Internal spline | Pneumatic | 1.5 | 150 | WLY5GS32 |
| WLY5GS32 | Protrusion connection | Pneumatic | 1.5 | 150 | WLY5GS32 |
| WLY6T46 | Internal spline | Pneumatic | 1.73 | 250 | WLY6T46 |
| WLY6T46 | Protrusion connection | Pneumatic | 1.73 | 250 | WLY6T46 |
| WLY6T40 | Internal spline | Pneumatic | 1.65 | 250 | WLY6T40 |
| WLY6T40 | Protrusion connection | Pneumatic | 1.65 | 250 | WLY6T40 |
| WLY5S100 | Internal spline | Pneumatic | 1.65 | 200 | WLY5S100 |
| WLY5S100 | Protrusion connection | Pneumatic | 1.65 | 200 | WLY5S100 |
| WLY540 | Internal spline | Pneumatic | 1.32 | 300 | WLY540 |
| WLY540 | Protrusion connection | Pneumatic | 1.32 | 300 | WLY540 |
| WLY526 | Internal spline | Pneumatic | 1.43 | 200 | WLY526 |
| WLY526 | Protrusion connection | Pneumatic | 1.56 | 200 | WLY5T26 |
| WLY530 | Internal spline | Pneumatic | 1.63 | 200 | WLY5-30 |
| WLY530 | Protrusion connection | Pneumatic | 1.63 | 200 | WLY5-30 |
| WLY535 | Internal spline | Pneumatic | 1.42 | 200 | WLY5-35 |
| WLY535 | Protrusion connection | Pneumatic | 1.42 | 200 | WLY5-35 |
| WLY5T97 | Internal spline | Pneumatic | 1.46 | 150 | WLYT92 |
| WLY5T97 | Protrusion connection | Pneumatic | 1.46 | 150 | WLYT92 |
| WLY6T100 | Internal spline | Pneumatic | 1.68 | 250 | WLY6T100-8 |
| WLY6T100 | Protrusion connection | Pneumatic | 1.68 | 250 | WLY6T100-8 |
| WLY653 | Internal spline | Pneumatic | 1.68 | 250 | WLY653 |
| WLY653 | Protrusion connection | Pneumatic | 1.68 | 250 | WLY653 |
| WLY650 | Internal spline | Pneumatic | 1.57 | 300 | WLY650 |
| WLY650 | Protrusion connection | Pneumatic | 1.57 | 300 | WLY650 |
| WLY8S85E | Internal spline | Pneumatic | 1.37 | 300 | WLY8S85 |
| WLY8S85E | Protrusion connection | Pneumatic | 1.37 | 300 | WLY8S85 |
| WLY5T88 | Internal spline | Pneumatic | 1.56 | 250 | WLY5T26 |
| WLY5T88 | Protrusion connection | Pneumatic, manual | 1.56 | 150 | WLY5T26 |
| 02 monvo series | |||||
| MW515JB | End key | Chang He | 1.93 | 120 | MW515 MW517 |
| MW515JB-H | spline | Chang He | 1.93 | 120 | MW515 MW517 |
| MW515EQF | End key | Manual | 1.93 | 120 | MW515 MW517 |
| MW515EQF | Protrusion connection | Manual | 1.93 | 120 | MW515 MW517 |
| MW520GAEC | End key | Chang He | 1.86 | 120 | MW520GA |
| MW520GE | End key | Chang He | 1.86 | 120 | MW520GE |
| MW520GAHB4-4 | End key | Chang He | 1.86 | 120 | MW520GAHB |
| MW520F-2 | Single bond | Manual | 1.72 | 180 | MW520 |
| MW520F1-3 | Internal spline | Manual, pneumatic | 1.72 | 180 | MW520 |
| MW520F2 | Protrusion connection | Manual, pneumatic | 1.72 | 180 | MW520 |
| MR70 | End key | Manual | 1.79 | 150 | MR70 |
| MR70 | Protrusion connection | Manual | 1.79 | 150 | MR70 |
| MT78Q | Internal spline | Manual, pneumatic | 1.67 | 200 | MT78Q |
| MT78Q | Protrusion connection | Manual, pneumatic | 1.67 | 200 | MT78Q |
| MR78 | Internal spline | Manual | 1.83 | 200 | MR78 |
| MR78 | Protrusion connection | Manual | 1.83 | 200 | MR78 |
| MT85Q-2 | Internal spline | Manual, pneumatic | 1.62 | 250 | MT85 |
| MT85Q-2 | Protrusion connection | Manual, pneumatic | 1.62 | 250 | MT85 |
| MT85EC3 | Internal spline | Manual, pneumatic | 1.62 | 250 | MT85 |
| MT85EC3 | Protrusion connection | Manual, pneumatic | 1.62 | 250 | MT85 |
| MR85Q | Internal spline | Manual, pneumatic | 1.62 | 250 | MR85 |
| MR85Q | Protrusion connection | Manual, pneumatic | 1.62 | 250 | MR85 |
| MR85E | Internal spline | Manual, pneumatic | 1.72 | 250 | MR85 |
| MR85E | Protrusion connection | Manual, pneumatic | 1.72 | 250 | MR85 |
| MR78QF | Internal spline | Manual, pneumatic | 1.67 | 200 | MR78Q |
| MR78QF | Protrusion connection | Manual, pneumatic | 1.67 | 200 | MR78Q |
| MW525F-1 | End key | Manual | 1.42 | 250 | MW525F1-3 |
| MW520QDL | Internal spline | Manual, pneumatic | 1.42 | 250 | MW520 |
| MW520QDA | Protrusion connection | Manual, pneumatic | 1.42 | 250 | MW520 |
| 03 Xihu (West Lake) Dis.feng series | |||||
| DF5S300 | Internal spline | Pneumatic | 1.57 | 250 | DF5S300 |
| DF5S300 | Protrusion connection | Pneumatic | 1.57 | 250 | DF5S300 |
| DF5S40 | Internal spline | Pneumatic | 1.49 | 300 | DF5S40 |
| DF5S40 | Protrusion connection | Pneumatic | 1.49 | 300 | DF5S40 |
| DF5S550 | Internal spline | Pneumatic | 1.47 | 300 | DF5S550 |
| DF5S550 | Protrusion connection | Pneumatic | 1.47 | 300 | DF5S550 |
| DF5S600 | Internal spline | Pneumatic | 1.53 | 300 | DF5S600 |
| DF5S600 | Protrusion connection | Pneumatic | 1.53 | 300 | DF5S600 |
| DF6S650 | Internal spline | Pneumatic | 1.57 | 300 | DF6S650 |
| DF6S650 | Protrusion connection | Pneumatic | 1.57 | 300 | DF6S650 |
| DF6S900 | Internal spline | Pneumatic | 1.58 | 350 | DF6S900 |
| DF6S900 | Protrusion connection | Pneumatic | 1.58 | 350 | DF6S900 |
| 04 Xihu (West Lake) Dis.i series | |||||
| LC5T88 | Internal spline | Pneumatic, manual | 1.56 | 150 | QL15C-04/SDQ51 |
| LC5T88 | Protrusion connection | Pneumatic, manual | 1.56 | 150 | QL15C-02 |
| LC5T26 | Internal spline | Pneumatic, manual | 1.63 | 150 | QL15C-03 |
| LC5T26 | Protrusion connection | Pneumatic, manual | 1.63 | 150 | QL15C-03 |
| LC5T97 | Internal spline | Pneumatic, manual | 1.57 | 200 | QL15A-01 |
| LC5T97 | Protrusion connection | Pneumatic, manual | 1.57 | 200 | QL15A-01 |
| MSB-5M | Internal spline | Manual | 1.56 | 150 | QL15C-02 |
| MSB-5M | Protrusion connection | Manual | 1.56 | 150 | QL15C-02 |
| LC6T46 | Internal spline | Manual | 1.79 | 250 | SDQ50/69LGQ1 |
| LC6T46 | Protrusion connection | Manual | 1.79 | 250 | SDQ50/69PQ1 |
| LC6T55 | Internal spline | Manual | 1.56 | 300 | QL30M-01 |
| LC6T55 | Protrusion connection | Manual | 1.56 | 300 | QL30M-01 |
| LC6T450 | Internal spline | Manual | 1.47 | 300 | QL30E-06 |
| LC6T450 | Protrusion connection | Manual | 1.47 | 300 | QL30E-06 |
| LC6T540 | Internal spline | Pneumatic | 1.47 | 300 | HWP-X31/63TQ |
| LC6T540 | Protrusion connection | Pneumatic | 1.47 | 300 | HWP-X31/63TQ |
| LC5T400 | Internal spline | Pneumatic | 1.53 | 300 | SDQ50/74PQ1 |
| LC5T400 | Protrusion connection | Pneumatic | 1.53 | 300 | QL15D-06 |
| LC5T150 | Internal spline | Pneumatic | 1.43 | 300 | QL12J |
| LC5T150 | Protrusion connection | Pneumatic | 1.43 | 300 | QL12J-01 |
| LC5T28 | Internal spline | Pneumatic | 1.57 | 200 | HWP-T38/63CHQ |
| LC5T28 | Protrusion connection | Pneumatic | 1.57 | 200 | HWP-T38/63CHQ |
| LC5T190 | Internal spline | Pneumatic | 1.63 | 300 | QL12G/QL12G-02 |
| LC5T190 | Protrusion connection | Pneumatic | 1.63 | 300 | QL12G/QL12G-02 |
| LC5T30 | Internal spline | Pneumatic | 1.49 | 200 | SDQ50/71LGQ1 |
| LC5T30 | Protrusion connection | Pneumatic | 1.49 | 200 | SDQ50/71PQ1 |
| ML642 | Internal spline | Pneumatic | 1.51 | 300 | SDQ5065PS-B |
| ML642 | Protrusion connection | Pneumatic | 1.51 | 300 | SDQ5065PS-B |
| 05 ZheJiang fast | |||||
| 8JS85E | Internal spline | Pneumatic | 1.26 | 300 | 8JS85E |
| 8JS85F | Internal spline | Pneumatic | 1.32 | 300 | 8JS85F |
| 8JS85C | Internal spline | Pneumatic | 1.17 | 300 | 8JS85C |
| 8JS60T | Internal spline | Pneumatic | 1.42 | 300 | 6DS60T |
| 8JS118 | Internal spline | Pneumatic | 1.53 | 350 | 8JS118 |
| 8JS119 | Internal spline | Pneumatic | 1.53 | 350 | 9JS119 |
| 06 heavy truck series | |||||
| DC5J80 | Internal spline | Pneumatic | 1.47 | 300 | DC5J80 |
| DC6J65 | Internal spline | Pneumatic | 1.61 | 300 | DC6J65 |
| DC6J85 | Internal spline | Pneumatic | 1.47 | 300 | DC6J85 |
| DC6J95 | Internal spline | Pneumatic | 1.41 | 350 | DC6J95 |
| DC7J120 | Internal spline | Pneumatic | 1.37 | 350 | DC7J120 |
| HW25505 | Internal spline | Pneumatic | 1.37 | 350 | HW25505 |
| HW9571 | Internal spline | Pneumatic | 1.4 | 350 | HW9571 |
| 07 Xihu (West Lake) Dis. series | |||||
| SC5T45 | Internal spline | Pneumatic | 1.54 | 300 | SC5P45 |
| SC6E-45 | Internal spline | Pneumatic | 1.47 | 300 | SC6E-45 |
| SC6T53 | Internal spline | Pneumatic | 1.47 | 300 | SC6T53 |
| SC5D | Internal spline | Pneumatic | 1.51 | 300 | SC5D |
| SC6J85 | Internal spline | Pneumatic | 1.42 | 300 | SC6J85 |
| SC7E | Internal spline | Pneumatic | 1.54 | 350 | SC7E |
| 8S-45 | Internal spline | Pneumatic | 1.57 | 300 | SC85-45 |
| SC8S×one | Internal spline | Pneumatic | 1.61 | 300 | SC8S×one |
| SC6S | Internal spline | Pneumatic | 1.48 | 300 | SC6S |
| SC6S×one | Internal spline | Pneumatic | 1.51 | 300 | SC6S×one |
| 08 FAW | |||||
| CA525 | Hand spline chain | Manual | 1.57 | 150 | CA5-25 |
| CA539 | Internal spline | Pneumatic | 1.44 | 200 | CA5-38 |
| CA653 | Internal spline | Pneumatic | 1.47 | 250 | CA6-53 |
| CA6-75 | Internal spline | Pneumatic | 1.47 | 250 | CA6-75 |
| CA6-85 | Internal spline | Pneumatic | 1.47 | 300 | CA6-85 |
| CA6-120 | Internal spline | Pneumatic | 1.38 | 300 | CA-120 |
| CA6-150 | Internal spline | Pneumatic | 1.43 | 300 | CA6-150 |
| CA7-90 | Internal spline | Pneumatic | 1.47 | 350 | CA7-90 |
| CA7-100 | Internal spline | Pneumatic | 1.47 | 350 | CA7-100 |
| 09 Tang Ling HangZhou | |||||
| TC528 | Internal spline | Manual pneumatic | 1.31 | 150 | TC5-28 |
| TC535 | Internal spline | Manual pneumatic | 1.43 | 200 | TC5T35 |
| TC545 | Internal spline | Pneumatic | 1.47 | 250 | TC5-45 |
| TC6T53 | Inner spline | Pneumatic | 1.47 | 250 | TC653 |
| TC650 | Inner spline | Pneumatic | 1.54 | 300 | TC650 |
| JS550 | Inner spline | Pneumatic | 1.47 | 300 | JS550 |
| JS5646 | Internal spline | Pneumatic | 1.53 | 250 | JS646 |
| JS6-950 | Internal spline | Pneumatic | 1.49 | 300 | JS6-950 |
| JS6-750 | Internal spline | Pneumatic | 1.52 | 300 | JS6-750 |
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Application: | Motor, Machinery, Agricultural Machinery, Car, Hydraulic Gear Pump Crane ( Oil Pump, Fuel Pump |
|---|---|
| Function: | Distribution Power |
| Hardness: | Hardened Tooth Surface |
| Samples: |
US$ 580/Piece
1 Piece(Min.Order) | Order Sample PTO
|
|---|
| Customization: |
Available
| Customized Request |
|---|
What Is a Gearbox?
There are several factors to consider when choosing a gearbox. Backlash, for example, is a consideration, as it is the angle at which the output shaft can rotate without the input shaft moving. While this isn’t necessary in applications without load reversals, it is important for precision applications involving load reversals. Examples of these applications include automation and robotics. If backlash is a concern, you may want to look at other factors, such as the number of teeth in each gear.
Function of a gearbox
A gearbox is a mechanical unit that consists of a chain or set of gears. The gears are mounted on a shaft and are supported by rolling element bearings. These devices alter the speed or torque of the machine they are used in. Gearboxes can be used for a wide variety of applications. Here are some examples of how gearboxes function. Read on to discover more about the gears that make up a gearbox.
Regardless of the type of transmission, most gearboxes are equipped with a secondary gear and a primary one. While the gear ratios are the same for both the primary and secondary transmission, the gearboxes may differ in size and efficiency. High-performance racing cars typically employ a gearbox with two green and one blue gear. Gearboxes are often mounted in the front or rear of the engine.
The primary function of a gearbox is to transfer torque from one shaft to another. The ratio of the driving gear’s teeth to the receiving member determines how much torque is transmitted. A large gear ratio will cause the main shaft to revolve at a slower speed and have a high torque compared to its counter shaft. Conversely, a low gear ratio will allow the vehicle to turn at a lower speed and produce a lower torque.
A conventional gearbox has input and output gears. The countershaft is connected to a universal shaft. The input and output gears are arranged to match the speed and torque of each other. The gear ratio determines how fast a car can go and how much torque it can generate. Most conventional transmissions use four gear ratios, with one reverse gear. Some have two shafts and three inputs. However, if the gear ratios are high, the engine will experience a loss of torque.
In the study of gearbox performance, a large amount of data has been collected. A highly ambitious segmentation process has yielded nearly 20,000 feature vectors. These results are the most detailed and comprehensive of all the available data. This research has a dual curse – the first is the large volume of data collected for the purpose of characterization, while the second is the high dimensionality. The latter is a complication that arises when the experimental gearbox is not designed to perform well.
Bzvacklash
The main function of a gearhead is to multiply a moment of force and create a mechanical advantage. However, backlash can cause a variety of issues for the system, including impaired positioning accuracy and lowered overall performance. A zero backlash gearbox can eliminate motion losses caused by backlash and improve overall system performance. Here are some common problems associated with backlash in gearheads and how to fix them. After you understand how to fix gearbox backlash, you’ll be able to design a machine that meets your requirements.
To reduce gearbox backlash, many designers try to decrease the center distance of the gears. This eliminates space for lubrication and promotes excessive tooth mesh, which leads to premature mesh failure. To minimize gearbox backlash, a gear manufacturer may separate the two parts of the gear and adjust the mesh center distance between them. To do this, rotate one gear with respect to the fixed gear, while adjusting the other gear’s effective tooth thickness.
Several manufacturing processes may introduce errors, and reducing tooth thickness will minimize this error. Gears with bevel teeth are a prime example of this. This type of gear features a small number of teeth in comparison to its mating gear. In addition to reducing tooth thickness, bevel gears also reduce backlash. While bevel gears have fewer teeth than their mating gear, all of their backlash allowance is applied to the larger gear.
A gear’s backlash can affect the efficiency of a gearbox. In an ideal gear, the backlash is zero. But if there is too much, backlash can cause damage to the gears and cause it to malfunction. Therefore, the goal of gearbox backlash is to minimize this problem. However, this may require the use of a micrometer. To determine how much gearbox backlash you need, you can use a dial gauge or feeler gauge.
If you’ve been looking for a way to reduce backlash, a gearbox’s backlash may be the answer. However, backlash is not a revolt against the manufacturer. It is an error in motion that occurs naturally in gear systems that change direction. If it is left unaccounted for, it can lead to major gear degradation and even compromise the entire system. In this article, we’ll explain how backlash affects gears and how it affects the performance of a gearbox.
Design
The design of gearboxes consists of a variety of factors, including the type of material used, power requirements, speed and reduction ratio, and the application for which the unit is intended. The process of designing a gearbox usually begins with a description of the machine or gearbox and its intended use. Other key parameters to consider during gearbox design include the size and weight of the gear, its overall gear ratio and number of reductions, as well as the lubrication methods used.
During the design process, the customer and supplier will participate in various design reviews. These include concept or initial design review, manufacturing design validation, critical design review, and final design review. The customer may also initiate the process by initiating a DFMEA. After receiving the initial design approval, the design will go through several iterations before the finalized design is frozen. In some cases, the customer will require a DFMEA of the gearbox.
The speed increaser gearboxes also require special design considerations. These gearboxes typically operate at high speeds, causing problems with gear dynamics. Furthermore, the high speeds of the unit increase frictional and drag forces. A proper design of this component should minimize the effect of these forces. To solve these problems, a gearbox should incorporate a brake system. In some cases, an external force may also increase frictional forces.
Various types of gear arrangements are used in gearboxes. The design of the teeth of the gears plays a significant role in defining the type of gear arrangement in the gearbox. Spur gear is an example of a gear arrangement, which has teeth that run parallel to the axis of rotation. These gears offer high gear ratios and are often used in multiple stages. So, it is possible to create a gearbox that meets the needs of your application.
The design of gearboxes is the most complex process in the engineering process. These complex devices are made of multiple types of gears and are mounted on shafts. They are supported by rolling element bearings and are used for a variety of applications. In general, a gearbox is used to reduce speed and torque and change direction. Gearboxes are commonly used in motor vehicles, but can also be found in pedal bicycles and fixed machines.
Manufacturers
There are several major segments in the gearbox market, including industrial, mining, and automotive. Gearbox manufacturers are required to understand the application and user industries to design a gearbox that meets their specific requirements. Basic knowledge of metallurgy is necessary. Multinational companies also provide gearbox solutions for the power generation industry, shipping industry, and automotive industries. To make their products more competitive, they need to focus on product innovation, geographical expansion, and customer retention.
The CZPT Group started as a small company in 1976. Since then, it has become a global reference in mechanical transmissions. Its production range includes gears, reduction gearboxes, and geared motors. The company was the first in Italy to achieve ISO certification, and it continues to grow into one of the world’s leading manufacturers of production gearboxes. As the industry evolves, CZPT focuses on research and development to create better products.
The agriculture industry uses gearboxes to implement a variety of processes. They are used in tractors, pumps, and agricultural machinery. The automotive industry uses gears in automobiles, but they are also found in mining and tea processing machinery. Industrial gearboxes also play an important role in feed and speed drives. The gearbox industry has a diverse portfolio of manufacturers and suppliers. Here are some examples of gearboxes:
Gearboxes are complex pieces of equipment. They must be used properly to optimize efficiency and extend their lifespan. Manufacturers employ advanced technology and strict quality control processes to ensure their products meet the highest standards. In addition to manufacturing precision and reliability, gearbox manufacturers ensure that their products are safe for use in the production of industrial machinery. They are also used in office machines and medical equipment. However, the automotive gearbox market is becoming increasingly competitive.
editor by CX
2023-04-21